Abstract:In this age of human civilization, there is a need for more efficient, cleaner, and renewable energy as opposed to that provided by nonrenewable sources such as coal and oil. In this sense, hydrogen energy has been proven to be a better choice. In this paper, a portable graphite crucible metal smelting furnace was used to prepare ten multi-element aluminum alloy ingots with different components. The microstructure and phase composition of the ingots and reaction products were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The reaction was carried out in a constant temperature water bath furnace at 60 °C, and the hydrogen production performance of the multi-element aluminum alloys in different proportions was compared by the drainage gas collection method. The experimental results show that the as-cast microstructure of Al–Ga–In–Sn aluminum alloy is composed of a solid solution of Al and part of Ga, and a second phase of In3Sn. After the hydrolysis reaction, the products were dried at 150 °C and then analyzed by XRD. The products were mainly composed of AlOOH and In3Sn. Alloys with different compositions react at the same hydrolysis temperature, and the hydrogen production performance is related to the ratio of low-melting-point metal elements. By comparing two different ratios of Ga–In–Sn (GIS), the hydrogen production capacity and production rate when the ratio is 6:3:1 are generally higher than those when the ratio is 7:2:1. The second phase content affects the hydrogen production performance.

Production of hydrogen by the interaction of rapidly hardened alloy foils from aluminum scrap and bismuth with water

Mechanical Alloying Synthesis and Characterization of Zinc Borohydride

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Hydrogen Production Using AlGaInSn Alloy with Semi-Solid Structures

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Development of Cost-Effective Sn-Free Al-Bi-Fe Alloys for Efficient Onboard Hydrogen Production through Al–Water Reaction

Study of Hydrogen Generation of Aluminum-Containing Compositions with Boric Acid

Hydrogen Generation from Borohydride Hydrolysis on Surface-Alloyed Ni Foam

The Role of Microstructural Length Scale in Hydrogen Generation Features of an Al-Sn-Fe Alloy

Study on Hydrogen Generation from the Hydrolysis of a Ball Milled Aluminum/calcium Hydride Composite

Hydrogen Production from Aluminum-Water Reactions at Low Temperatures: Based on an In-Situ Two Powders of Different Particle Sizes

Effect of Fe on the Hydrogen Production Properties of Al-Bi-Sn Composite Powders

Silver-Assisted Hydrogen Evolution from Aluminum Oxidation in Saline Media

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

The Effect of Cracks and Alloy Phase Conditions on the Hydrolysis characteristics of Al-10Bi Alloy Powder (composites)

Enhanced Hydrogen Generation Performance of Al-Rich Alloys by a Melting-Mechanical Crushing-Ball Milling Method

Effect of Different Cu Contents on the Microstructure and Hydrogen Production of Al–Cu-Ga-In-Sn Alloys for Dissolvable Materials

Mild hydrogen production from the hydrolysis of Al–Bi–Zn composite powder

Metal Substrate Enhanced Hydrogen Production of Aluminum Fed Liquid Phase Ga–In Alloy Inside Aqueous Solution

Dynamic Process of Hydrogen and Heat Generation from Reaction of Al–Li Alloy Powders and Water Vapor at Moderate Temperatures