Abstract:The solvent-free amorphous Mg(BH4)(2) composite was in-situ synthesized by ball milling LiBH4 and MgCl2. It is found that the onset dehydrogenation temperature of the as synthesized composite is 126.9 degrees C, which is roughly 156 degrees C lower than that of pristine Mg(BH4)(2). The activation energy of the amorphous Mg(BH4)(2) and pristine Mg(BH4)(2) for the first dehydrogenation step was calculated as 120.01 kJ/mol and 487.99 kJ/mol, respectively. Hence the kinetics improvement is certified by the lower Ea value of the dehydrogenation process. When adding NbF5 into the composite, the catalyzed composite exhibits better hydrogen storage properties compared to pristine and amorphous Mg(BH4)(2). The catalyzed composite starts to release hydrogen at proximately 120 degrees C with a total capacity of 10.04 wt %. The reversibility of the catalyzed composite is also improved. The capacity of the catalyzed composite at the second cycle is 5.5 wt%. For the third and fourth cycles the catalyzed composite can still liberate 4 wt% H-2. Besides, the onset hydrogen desorption temperature during four cycles are extremely lower than those of pristine and amorphous Mg(BH4)(2). The peaks of the intermediate MgB12H12 is detected by FTIR as the regenerated hydrogenation product in the catalyzed composite. It can be speculated from the detailed analysis that there are mainly three reasons for the improved properties. Firstly, the additive NbF5 is favorable to enhance the hydrogen storage properties by modifying the dehydrogenation path and producing MgF2 and NbB2 as new products. Secondly, the in-situ formation of amorphous Mg(BH4)(2) is likely to improve the dehydrogenation properties of the samples due to its different reactivity comparing to crystal ones. Finally, LiCl can serve as buffer in the composite and thus improve the dehydrogenation properties. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Mechanical Alloying Synthesis and Characterization of Zinc Borohydride

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Ammine Bimetallic (na, Zn) Borohydride for Advanced Chemical Hydrogen Storage

Structure and Decomposition of Zinc Borohydride Ammonia Adduct: Towards a Pure Hydrogen Release

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

A Novel Li–Ca–B–H Complex Borohydride: Its Synthesis and Hydrogen Storage Properties

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Microstructure and hydrogen storage properties of Ti10V84-xFe6Zrx (x = 1-8) alloys

In-situ Synthesis of Amorphous Mg(BH4)2 and Chloride Composite Modified by NbF5 for Superior Reversible Hydrogen Storage Properties

The Effects of Partial Substitution of Mn by Cr on the Phase Structure, Microstructure and Electrochemical Properties of Ti-Zr-V-Mn-Ni Hydrogen Storage Alloys

Hydrogen Storage Properties of LiBH4–Li3AlH6 Composites

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Synthesis and Hydrogen Storage Property Tuning of Zr(BH4)4·8NH3 Via Physical Vapour Deposition and Composite Formation

Study on the Dehydrogenation Properties and Reversibility of Mg(Bh4)(2)-Alh3 Composite under Moderate Conditions

High energy ball-milling preparation of Co-B amorphous alloy with high electrochemical hydrogen storage ability

Study on microstructure and the hydrogen storage behavior of a TiVZrNbFe high-entropy alloy

In situ coupling metallophilic Zn sites and interfacial LiCl stabilizer to achieve one-step reversible hydrogen storage in Li/Na dual-cation borohydride

Zirconium-Modified Medium-Entropy Alloy (TiVNb)85Cr15 for Hydrogen Storage

Hydrogen Sorption Properties of a Novel Refractory Ti-V-Zr-Nb-Mo High Entropy Alloy

Exploring the Hydrogen Sorption Capabilities of a Novel Ti-V-Mn-Zr-Nb High-Entropy Alloy