Abstract:To make the steel/iron composites with better comprehensive mechanical properties, a novel iron matrix composite reinforced with three-dimensional core-shell structure (CS) reinforcing particulates is designed and fabricated via powder hot-pressing sintering process. Studies have shown that the CS consists of isolated soft W core and dense hard shell, that is, showing the structural characteristics of "inner soft and outer hard". When the carbon content of the raw material powder Fe–W–C ternary system is 0, 0.5, 1.0, 1.5 and 2.0 wt%, the CS of (Fe7W6 + Fe2W), 3W3C, (W2C + WC + Fe3W3C)Ⅰ, (W2C + WC + Fe3W3C)Ⅱ, and (W2C + WC + Fe3W3C)Ⅲ is formed in the matrix, respectively. The formation of CSs with different characteristics is mainly due to the diffusion of Fe atoms and/or C atoms into the W lattice to undergo a diffusion-type solid state phase transformation to form corresponding compounds and the formation kinetics of different phases determined by different carbon concentrations. Furthermore, the results of nanoindentation and Vickers indentation show that the hardness of the shell layer is much greater than that of the metal W core and matrix, but its plastic deformation rate is much smaller than that of the metal W core and matrix. The metal W core and the iron matrix can significantly inhibit the length of the crack propagation, thereby improving the toughness of the composite. And the hard shell layer with high volume fraction can significantly improve the strength of the composite. Therefore, the iron matrix composite reinforced with three-dimensional CS reinforcing particulates is expected to obtain good toughness and excellent strength, and this work may provide a new strategy for the structural design of steel/iron materials.

FABRICATION AND PROPERTIES OF HIGH-CHROMIUM CAST IRON DISPERSED STEEL MATRIX COMPOSITE

Fabrication of a Composite Material of High‐Chromium Cast Iron Dispersed in Low‐Carbon Steel by Hot‐Rolling Process

Microstructure and tensile behavior of high-chromium cast iron/low-carbon steel composite fabricated by accumulative roll-bonding

Microstructure and Mechanical Properties of High-Chromium Cast Iron/Low-Carbon Steel Composite Prepared by Hot Rolling Process

Mechanical Properties and Thermal Stability of Carbide Dispersion Strengthened CLF-1 Steel

Enhanced strength and ductility of high chromium cast iron/low carbon steel bimetal by heterostructure design

Effect of Hot-Rolling Deformation on Microstructure and Sliding Wear of High-Chromium Cast Iron

Design a Ti6Al4Vâ€“Ti43Al9V laminated composite with high strength and fracture toughness

Preparation and Properties of ZTA + WC Particles/Hypereutectic High Chromium Cast Iron Composites

Microstructural evolution and performance analysis of WC-11Co reinforced iron matrix composites

Interfacial Bonding And Abrasive Wear Behavior Of Iron Matrix Composite Reinforced By Ceramic Particles

The investigation on the fabrication and microstructure of a novel core-shell structure reinforced iron matrix composite

Design of bimetallic interpenetrating biomimetic structures and additive-casting synergetic manufacturing

Mechanical property and failure mechanisms of hot rolling and aging treatment with different layer thickness on (CoCrNi)94Al3Ti3/ Maraging -C350 multilayer composite steel

Microstructure and Mechanical Properties of H13 Steel/High-Speed Steel Composites Prepared by Laser Metal Deposition

Simultaneous improvement on strength and ductility of iron matrix composites using (W-Fe 3 W 3 C/Fe) composite fibers

Phase formation and mechanical properties of iron-based intermetallic/steel laminate composites

Microstructure and properties of FeCoNiCrAl high-entropy alloy particle-reinforced Cu-matrix composites prepared via FSP

Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite

Multilayer Maraging/CoCrNi Composites With Synergistic Strengthening-Toughening Behavior

An Al–7Si Alloy/cast Iron Bimetallic Composite with Super-High Shear Strength