Abstract:Heterostructured materials consist of heterogeneous zones with dramatic variations in mechanical properties, and have attracted extensive attention due to their superior performance. Various heterostructured materials have been widely investigated in recent years. In the present study, a combination of two different types of heterogeneous structures, a surface bimodal structure and gradient structure, was designed using the traditional surface mechanical attrition treatment (SMAT) method in pure copper, and the mechanical properties and microstructural evolution of dual-heterostructure Cu were studied in depth. In total, 100 stainless steel balls with a diameter of 6 mm were utilized to impact the specimen surface at room temperature for a short period of time. In this work, the sample surface was divided into hard areas and soft areas, along with a roughly 90 μm gradient structure in the cross-sectional direction after 30 s of SMAT processing. After the partial SMAT processing, lasting 30 s, the strength increased to 158.0 MPa and a considerable ductility of 25.7% was sustained, which overcomes the strength–ductility trade-off. The loading–unloading–reloading (LUR) test was utilized to measure the HDI stress, and the result showed that the HDI stress of the partial SMAT sample was much higher than the annealed one, especially for the Cu-SMAT-30S specimen, the strength of which increased from 80.4 MPa to 153.8 MPa during the tensile test. An in situ digital image correlation (DIC) investigation demonstrated that the strain developed stably in the Cu-SMAT-10S specimen. Furthermore, electron backscatter diffraction (EBSD) was carried out to study the microstructural evolution after partial SMAT processing; the KAM value increased to 0.34 for the Cu-SMAT-10S specimen. This research provides insights for the effective combination of superior strength and good ductility in dual-heterostructure materials.

Enhanced strength and ductility of high chromium cast iron/low carbon steel bimetal by heterostructure design

Evading the strength-ductility trade-off dilemma in steel-nickel heterostructured material by bionic crossed-lamellar structures

Heterostructures Enhance Simultaneously Strength and Ductility of a Commercial Titanium Alloy

Formation Mechanism of Bimetal Composite Layer Between LCS and HCCI

A novel low carbon steel/hypereutectic high-chromium white cast iron welded joint with heterogeneous structure

Improving strength-ductility balance of a brittle Al-doped FeCrNi multi-principal element alloy by introducing a heterostructure with hard phase enveloping soft phase

Strength and Ductility Enhancement of Plain Carbon Steel by Heterostructure Design

A heterostructured bainitic steel produced by two-step austempering and low-temperature ausforming

Enhancing the interface strength of additively manufactured 316 L/CuSn10 bimetallic components through heterogeneous microstructures

High Density of Interfaces with Severely Mechanical Difference Controlled High Ductility in Heterogeneous Materials Based on Crystal Plasticity

Enhanced strength and ductility of the low-carbon steel with heterogeneous lamellar dual-phase structure produced by cyclic intercritical rolling

FABRICATION AND PROPERTIES OF HIGH-CHROMIUM CAST IRON DISPERSED STEEL MATRIX COMPOSITE

Heterogeneous Lamella Design to Tune the Mechanical Behaviour of a New Cost-Effective Compositionally Complicated Alloy

Tailoring Heterogeneous Microstructure in a High-Strength Low-Alloy Steel for Enhanced Strength-Toughness Balance

Towards enhanced strength-ductility in pure copper by fabricating hetero grain composite laminates

Achieving Unexpected Strength and Ductility Synergies in Heterogeneous Metastable Lamellar Steels

Investigation of Mechanical Properties and Microstructural Evolution in Pure Copper with Dual Heterostructures Produced by Surface Mechanical Attrition Treatment

Enhancing strength–ductility synergy in medium Mn steel with hetero-structured austenite developed by two-stage cyclic thermomechanical treatment and flash annealing

Enhanced strength-ductility synergy of Al/Zn/Al laminated composite with unique interface and multi-modal heterogeneous microstructure

Microstructure and Mechanical Properties of High-Chromium Cast Iron/Low-Carbon Steel Composite Prepared by Hot Rolling Process

Enhanced strength-ductility synergy and mechanisms of heterostructured Ti6Al4V-Cu alloys produced by laser powder bed fusion