Abstract:The precipitation behavior of a novel Ni-Fe-based superalloy developed for advanced ultra-supercritical (A-USC) coal-fired power plant applications during high-temperature aging treatment was investigated. The results showed that the major precipitates in the novel alloy were randomly distributed MC carbides, M23C6 carbides at grain boundaries, and the γ′-Ni3 (Al, Ti) phase in grain interiors after aging. MC remained relatively stable during both short-term and long-term aging. M23C6 quickly precipitated and exhibited a discrete distribution at grain boundaries during short-term aging, and partly developed into continuous films during long-term aging. After uniform precipitation, the shape of γ′ remained spherical, and the size kept increasing with aging time according to the Lifshitz–Slyozov–Wagner (LSW) model. The hardness of the novel alloy was mainly associated with the precipitation behavior of γ′; as γ′ gradually precipitated, the hardness steadily increased; after complete precipitation, as the size of γ′ increased, the hardness first increased and then decreased, reaching the peak hardness when the average radius of γ′ achieved the critical size. In addition, the novel alloy exhibited abnormal coarsening behavior at grain boundaries during both short-term and long-term aging. The coarsened grain boundaries were actually precipitate-free zones (PFZs) and the coarsened and elongated rod-like particles inside were identified as γ′ precipitates. The mechanism of strain-induced grain boundary migration and the discontinuous coarsening reaction is proposed for the formation of PFZs. Furthermore, PFZs were considered to be potential crack sources during the creep rupture test, leading to earlier failure of the material.

Modification and characterisation of nickel-based alloy materials for ultra-supercritical power generation

Microstructure and deformation mechanism of Ni-based wrought superalloys for A-USC power plants: a review

Research Progress in Nickel Base Single Crystal Superalloys

Influence of Alloying Compositions on the Properties of Nickel-Based Superalloys: A Review

High-Temperature Air and Steam Oxidation and Oxide Layer Characteristics of Alloy 617

Utilizing local phase transformation strengthening for nickel-base superalloys

New Research Development of Superalloy GH4169

Study of Microstructure of Nickel-Based Superalloys at High Temperatures

Oxidation Behaviour of New Nickel-Base Superalloys with Varying Aluminium: Niobium Ratio

The Application of Grain Boundary Engineering to a Nickel Base Superalloy for 973 K (700 °C) USC Power Plants

Optimizing the Thermomechanical Process of Nickel-Based ODS Superalloys by an Efficient Method

Investigation of Precipitation Behavior of a Novel Ni-Fe-Based Superalloy during High-Temperature Aging Treatment

Phase transformation strengthening of high-temperature superalloys

Materials for ultra-supercritical coal-fired power plant boilers

A New Wrought Ni–Fe-base Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C

Effect of Heat Treatment on the Microstructure of a Ni–Fe Based Superalloy for Advanced Ultra-Supercritical Power Plant Applications

Development of strong, oxidation and corrosion resistant nickel-based superalloys: critical review of challenges, progress and prospects

A Study of the Hot Salt Corrosion Behavior of Three Nickel-Based Single-Crystal Superalloys at 900 °C

Recent Research Progress in the Mechanism and Suppression of Fusion Welding-Induced Liquation Cracking of Nickel Based Superalloys

Research progress in fabrication of nickel-based superalloy components by electron beam powder bed fusion

Investigations on surface modification of nickel-based superalloy subjected to ultrasonic surface rolling process