Abstract:Nickel-based single crystal superalloys (Ni-SXs) are of great interests in aircraft industry due to their excellent high temperature creep strength deriving from the rigid gamma/gamma prime (gamma/gamma') micro-structure and the single crystal nature. The creep properties of Ni-SXs depend strongly on the degradation rate of the original rigid gamma/gamma' microstructure with the dislocation movements in the microstructure. Since the applied temperature and stress strongly affect the dislocation movements, the different creep mechanisms are displayed to Ni-SXs during low temperature (similar to 750 degrees C), mid-temperature (similar to 950 degrees C) and high temperature (similar to 1100 degrees C) creep. The creep deformation during low temperature creep is mainly caused by the shearing of gamma' phase by a limited number of dislocations, while high temperature creep mainly occurs to the accumulation of creep strains with the increased dislocation activities in gamma phase. To enhance the creep properties of alloy, a variety of strategies of the microstructural optimization need to be considered. One is to increase the volume fraction of gamma' phase to enhance the precipitation strengthening effects. But excessive amounts of gamma' phase are disadvantageous to low temperature strength of alloy. The coarsening of gamma' phase and the rafting process strongly correlates to dislocation movements. It is of importance to discuss the specific mechanisms of coarsening and rafting as well as their influence to the creep properties of alloy. The lattice misfit between the gamma and gamma' phase plays an important role in influencing the coarsening of gamma' phase and the creep properties of alloy. A proper lattice misfit helps to form the cubic gamma' phase which is advantageous to alloy. But a too large lattice misfit can promote the coarsening of gamma' phase that damages the structural stability of alloy at high temperatures. The increased additions of refractory elements in alloy promote the formation of topologically close-packed (TCP) phase. TCP phase facilitates the nucleation and propagation of micro-cracks around it that damages the creep properties of alloy. This review aims to summarize some aspects of microstructural evolution during creep of alloy with considering their effects to creep properties. To guide the design of Ni-SXs in future, some perspectives about the microstructural optimization are properly provided. (C) 2019 Elsevier B.V. All rights reserved.

Microstructure and deformation mechanism of Ni-based wrought superalloys for A-USC power plants: a review

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Creep Mechanism of A Ni-Co Base Wrought Superalloy

A New Wrought Ni–Fe-base Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C

Microstructural evolution and creep mechanisms in Ni-based single crystal superalloys: A review

A Review of Composition Evolution in Ni-based Single Crystal Superalloys

Tensile, Creep Behavior and Microstructure Evolution of an As-Cast Ni-based K417G Polycrystalline Superalloy

Investigation of Precipitation Behavior of a Novel Ni-Fe-Based Superalloy during High-Temperature Aging Treatment

Microstructural and Compositional Design of Ni-based Single Crystalline Superalloysd - A Review

Stability of Microstructure and Mechanical Properties of A Ni-Based Superalloy for Advanced Ultra-Supercritical Fossil Power

Microstructure and Mechanical Properties of a New Ni-Cr-Fe-W-Al Alloy for Advanced Ultra-Supercritical Power Plants

Microstructure Optimization for Higher Strength of a New Fe–Ni-based Superalloy

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Impacts of different designed microstructures on creep performance of a Ni-based wrought superalloy

Research Progress of Effects of Mo and W on Microstructure and Key Properties of Ni-based Single Crystal Superalloys

L1 2 ‐Strengthened Co‐Rich Alloys for High‐Temperature Structural Applications: A Critical Review

Effect of Creep Process on the Microstructural Evolution and Deformation Behavior of a New Powder Metallurgy Ni-Based Superalloy

Microstructure and Dislocation Structure Evolution During Creep Life of Ni-based Single Crystal Superalloys

Microstructural Stability of Long-Term Aged Wrought Ni–Fe-based Superalloys

Intermediate temperature creep and deformation behavior of a nickel-based superalloy prepared by electron beam layer solidification

Connecting the Microstructure Stability of Ni Based Superalloys to Their Chemical Compositions