Abstract:Abstract Most studies of liquid lubricants were carried out at temperatures below 200 °C. However, the service temperature of lubricants for aerospace and aeroengine has reached above 300 °C. In order to investigate the friction mechanism and provide data for high temperature lubrication, the friction and wear properties of chlorophenyl silicone oil (CPSO)-lubricated M50 steel and Si 3 N 4 friction pairs were investigated herein. Ball-on-disk experimental results show that the lubrication performance of CPSO varies significantly with temperature. Below 150 °C, coefficient of friction (COF) remains at 0.13–0.15 after the short running-in stage (600 s), while the COF in the running-in stage is 0.2–0.3. At 200 °C and above, the running-in time is much longer (1,200 s), and the initial instantaneous maximum COF can reach 0.5. Under this condition, the COF gradually decreases and finally stabilizes at around 0.16–0.17 afterwards. This phenomenon is mainly due to the different thickness of boundary adsorption film. More importantly, the wear rate of M50 steel increases significantly with the temperature, while the wear rate barely changes at temperatures above 200 °C. The anti-wear mechanism is explained as tribochemical reactions are more likely to occur between CPSO and steel surface with the increased temperature, generating the FeCl 2 protective film on the metal surface. Accordingly, FeCl 2 tribochemical film improves the lubrication and anti-wear capacity of the system. At high temperatures (200–350 °C), FeCl 2 film becomes thicker, and the contact region pressure becomes lower due to the larger wear scar size, so the wear rate growth of M50 steel is much smaller compared with that of low temperatures (22–150 °C). The main findings in this study demonstrate that CPSO lubricant has good anti-wear and lubrication capacity, which is capable of working under temperatures up to 350 °C.

The Tribological and Adsorption Performance of Chlorophenyl Silicone Oil Using Different Ceramic Materials under High Temperature

The Thermal Stability and Lubricity of Zinc Thiomolybdenate at Temperatures Up to 500°C

High-Temperature Superlubricity Realized with Chlorinated-Phenyl and Methyl-Terminated Silicone Oil and Hydrogen-Ion Running-in.

Exploring the Effect of Nanoparticle Size on the Tribological Properties of Sio2 / Polyalkylene Glycol Nanofluid under Different Lubrication Conditions

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

Friction and Wear of Self-Mated SiC and Si 3 N 4 in Green Water-Based Lubricant

High temperature lubrication performance of chlorophenyl silicone oil

Study on tribological behaviors of Si3N4 based ceramics sliding against POM under different solutions

Effect of the grease thickener on tribological properties of Si3N4/GCr15 contact interface and the performance in hybrid ceramic ball bearing

The influence of polydiethylsiloxane (PDES) concentration on the tribolfilm of chlorophenyl silicone oil (CPSO) under high-temperature lubrication

Tribological behavior of various ceramic materials sliding against CF/PTFE/graphite-filled PEEK under seawater lubrication

Wear Mechanism and Evolution of Tribofilm of Ceramic on Steel Pairs under Ester Oil Lubrication in Wide Temperature Range

Bionic sweat high temperature self-lubricating coating based on ceramic precursor polysilazanes

Tribological Behavior of Liquid Phase Sintered SiC Ceramics Under Dry Condition

Tribological performance of silicone oil based Al2O3 nano lubricant for an Mg alloy subjected to sliding at elevated temperatures

Investigation on the tribological properties of ceramics rubbing against stainless steel at high temperature

Modification on the Tribological Properties of Ceramics Lubricated by Water Using Fullerenol As a Lubricating Additive

A comparative study on tribological behavior of Al2O3, AlN, Si3N4 and ZrO2 ceramics sliding against polycrystalline diamond ball

Tribological Characteristics and Degradation Mechanism of Typical Synthetic Lubricants from Room Temperature to 300 °C

Research on Tribology Property of Si-3N-4 Ceramic and Chilled Iron under Oil-Less Lubrication

Tribological Behavior of Various Plasma-Sprayed Ceramic Coatings