Abstract:Different terrestrial terahertz applications would benefit from large-format arrays, operating in compact and inexpensive cryocoolers at liquid helium temperature with sensitivity, limited by the 300-K background radiation only. A voltage-biased Transition-Edge Sensor (TES) as a THz detector can have sufficient sensitivity and has a number of advantages important for real applications as linearity of response, high dynamic range and a simple calibration, however it requires a low-noise current readout. Usually, a current amplifier based on Superconducting Quantum-Interference Device (SQUID) is used for readout, but the scalability of this approach is limited due to complexity of the operation and fabrication. Recently, it has been shown that instead of SQUID it is possible to use a current sensor, which is based on the nonlinearity of the kinetic inductance of a current-carrying superconducting stripe. Embedding the stripe into a microwave high-Q superconducting resonator allows for reaching sufficient current sensitivity. More important, it is possible with the resonator approach to scale up to large arrays using Frequency-Division Multiplexing (FDM) in GHz range. Here, we demonstrate the operation of a voltage-biased TES with a microwave kinetic-inductance current amplifier at 4.2 K. We measured the expected intrinsic Noise-Equivalent Power NEP ~$5\times 10^{-14} \; \rm W/Hz^{1/2}$ and confirmed that a sufficient sensitivity of the readout can be reached in conjunction with a real TES operation. The construction of an array with the improved sensitivity ~ $10^{-15}\; \rm W/Hz^{1/2}$ at 4.2 K could be realized using a combination of the new current amplifier and already existing TES detectors with improved thermal isolation.

Dark Current Measurements on a Superconducting Cavity using a Cryogenic Current Comparator

High Inductance Cryogenic Current Comparators for Beamlines

Monte Carlo Comparisons to a Cryogenic Dark Matter Search Detector with low Transition-Edge-Sensor Transition Temperature

Fast time-domain current measurement for quantum dot charge sensing using a homemade cryogenic transimpedance amplifier

Cryogenic loss monitors with FPGA TDC signal processing

Superconducting Microwave Detector Technology for Ultra-Light Dark Matter Haloscopes and other Fundamental Physics Experiments: Device Physics (Part II)

Monte Carlo calculations of cryogenic photodetector readout of scintillating GaAs for dark matter detection

Octagonal Double Transformer SQUID Sensors with Large Input Inductance for Cryogenic Current Comparator

Cryogenic GaAs high-electron-mobility-transistor amplifier for current noise measurements

Dark counts in optical superconducting transition-edge sensors for rare-event searches

Thermocurrents and their Role in high Q Cavity Performance

Simulation of RF Cavity Dark Current in Presence of Helical Magnetic Field

Terahertz Transition-Edge Sensor with Kinetic-Inductance Amplifier at 4.2 K

Investigation of Analog/RF behaviour of Asymmetrical Gate Tunnel FET at Cryogenic temperatures

Physics-based compact current model for Schottky barrier transistors at deep cryogenic temperatures including band tail effects and quantum oscillations

Performance of a 4 Kelvin pulse-tube cooled cryostat with dc SQUID amplifiers for bolometric detector testing

AC Measurement of the Nernst effect of thin films at low temperatures

Temperature Measurement on Copper Surfaces for Superconducting Thin Film Cavity Applications

Dark Current Studies for SwissFEL

A Switched Capacitor Waveform Digitizing ASIC at Cryogenic Temperature for HPGe Detectors