Abstract:The cast IN 713 C alloy is extensively used in the aerospace and automobile industries. Even with improved casting methods, the inhomogeneity in the microstructure is still inevitable and causes strain localizations during cyclic loading. So far, the effect of microstructural variables on the low cycle fatigue (LCF) deformation behavior of IN 713 C alloy has rarely been studied. In this study, IN 713 C alloy is LCF tested at 650°C and 750°C for strain amplitudes of 0.35% to 0.6%. The results showed that the deformation heterogeneity resulted from carbides, γ′ precipitates, and γ–γ′ eutectics distribution, governing the LCF failure micro‐mechanisms. The principle fatigue cracks were seen to be initiated from the precipitate‐free zone and oxidized‐surface carbides. It is corroborated that the higher GNDs were observed at carbide/matrix, eutectic/matrix, γ′/matrix interfaces, and in the interdendritic areas where voids and cracks formed. The higher GNDs at these sites facilitate crack initiation and propagation.

Role of micro‐constituents on the fatigue deformation micro‐mechanisms of IN 713 C alloy