Numerical Simulations of IBC Solar Cells Based on Poly-Si Carrier-Selective Passivating Contacts
Paul Procel,Guangtao Yang,Olindo Isabella,Miro Zeman
DOI: https://doi.org/10.1109/jphotov.2019.2892527
2019-03-01
IEEE Journal of Photovoltaics
Abstract:This paper presents an analysis of physical mechanisms related to operation and optimization of interdigitated back contact (IBC) poly-silicon-based devices. Concepts of carrier selectivity and tunneling are used to identify the parameters that impact on the fill factor. Then, based on technology computer-aided design (TCAD) numerical simulations, we describe the device performance in terms of transport and passivation. A validation of the model is performed by matching measured and simulated R, T, and external quantum efficiency spectra and electrical parameters. As result of such process, the opto-electrical losses of the reference device are identified. Then, we execute a study of the impact of process parameters on the performance of the IBC device under analysis. Assuming a uniform SiO2 layer, simulation results reveal that both n-type and p-type poly-Si contacts can be theoretically perfect (i.e., approx. lossless), if assuming no interface recombination but considering tunneling of both carrier types. In other words, there exists an optimum oxide thickness (1nm) for which majority carriers tunneling works already very well, and minority tunneling is still low enough to not result in significant recombination. Moreover, SiO2 thickness up to maximum 1.6 nm is crucial to achieve high efficiency. Regarding rear geometry analysis, the efficiency curve as a function of emitter width peaks at 70 of pitch coverage. Further, it is shown that diffused dopants inside crystalline silicon make the device resilient to passivation quality. Finally, the calibrated model is used to perform an optimization study aiming at calculating the performance limit. The estimated performance limit is 27.3 for a 100-m-thick bulk, 20-nm-thick poly-silicon layers, silver as rear contact, and double ARC.
energy & fuels,materials science, multidisciplinary,physics, applied