Abstract:Thermal management has become one of the critical problems in high-power laser systems. The laser crystal, which dissipates a heat flux over 150 W/cm2, is the most challenging component when solving the thermal problem. In this work, a specialized central-jetting microchannel heat sink (MCHS) is proposed purposely for a small-size laser crystal with high heat fluxes. Considering the space constraint and installation restriction, the MCHS has a narrow width to fit with the laser crystal, while its length is extended to enhance the heat dissipation capability. The MCHS is integrated by welding the two layers completely through a vacuum brazing method. Central-jetting impingement is introduced to enhance the cooling efficiency. Coolant is flushed vertically into the microchannel layer toward the central heating region where the heating source is attached at the central bottom of the MCHS. We conduct a parametric study on the thermal performance of the MCHS by experiments. The overall heat transfer coefficient of the MCHS achieves 50 × 103 W/(m2•K), and the average heat transfer coefficient of the microchannel reaches 21.5 × 103 W/(m2•K). The surface temperature of the heating head is controlled below 65 °C, and the temperature variation is less than 5 °C. In the solid bottom of the MCHS, thermal resistance in vertical direction is over 1.8 times of that in the horizontal direction, ensuring an efficient heat dissipation in the extended volume. The local heat transfer characteristics are further examined through additional numerical simulations. The wall temperature of the microchannel and the local heat transfer coefficient have a high plateau in the heating region, and then drop significantly along the flow direction. Due to heat transfer enhancement by jet impingement, the heat transfer coefficient in the central region is generally 15% higher than that averaged on the full microchannel.

Thermal performance of an embedded heat source vapor chamber in microwave solid-state power amplifier cooling

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Experimental Research on an Embedded Heat Source Vapor Chamber for Aerospace Electronic Cooling

Experimental Investigation on the Thermal Performance of a Large-Size Aluminum Vapor Chamber for Multi-Point Heat Sources

Transient Performance of a PCM-based Heat Sink with a Partially Filled Metal Foam: Effects of the Filling Height Ratio

Thermal performance of ultra-thin vapor chamber with etched micro-structure for electronics cooling

Experimental Investigation on Ultra-Thin Vapor Chamber with Composite Wick for Electronics Thermal Management

Study on the thermal performance of pulmonary vascular-inspired grooved vapor chamber

Laser Microstructuring of Extremely-Thin Vapor Chamber with Hybrid Configuration for Excellent Heat Dissipation

Heat transfer performance analysis of an ultra-thin aluminum vapor chamber with serrated microgrooves

Thermal Performance of a Liquid-cooling Assisted Thin Wickless Vapor Chamber

Experimental study on ultra-thin silicon-based VC for chip-level heat dissipation

Evaluation of Thermal Performance of a Wick-free Vapor Chamber in Power Electronics Cooling

Experimental investigation on enhanced flow and heat transfer performance of micro-jet impingement vapor chamber for high power electronics

Thermal performance enhancement of vapor chamber with modified thin screen mesh wick by laser etching

An Improved Thermal Conductivity Polyurethane Composite for a Space Borne 20KV Power Supply

Experimental investigation of post and vented vapor chamber designs for high heat flux dissipation

Design. Fabrication, and Test of an Embedded Si-Glass Microchannel Heat Sink for High-power RF Application

Thermal performance of a central-jetting microchannel heat sink designed for a high-power laser crystal

Enhancing heat transfer performance in 3D-printed integrated vapor chamber using composite structures

A novel ultra-thin vapor chamber with composite wick for portable electronics cooling