Abstract:Hybrid fillers to build an efficient thermal conductivity network. Traditional integrated circuit (IC) packaging materials and printed circuit board substrate materials suffer from several limitations including low thermal conductivity, high coefficient of thermal expansion (CTE), and poor dielectric properties. Although significant efforts have been made to enhance these properties, achieving a single composite system with simultaneous high thermal conductivity, extremely low CTE, and dielectric loss remains a formidable task. In this study, we propose a hybrid polymer composite system that addresses these challenges. Our approach involves utilizing a thermosetting polyphenylene oxide (PPO) as the resin matrix, while incorporating boron nitride (BN) sheets with high thermal conductivity and alumina (Al2O3) spheres with favorable fluidity as fillers. To optimize the composite properties, the filler surfaces are modified using dopamine and silane coupling agents, ensuring proper interface control. The composites exhibit significant improvements in thermal conductivity, reduced dielectric loss and CTE, while maintaining excellent processibility. Specifically, with a composition of 25 vol% BN and 25 vol% Al2O3, the thermal conductivity of the composite reaches 2.18 W·m−1 K−1, surpassing neat PPO resin by a factor of 10.9. Simultaneously, the CTE decreases from 2.27% to 1.18% between 50 and 260°C, and the dielectric loss reduces from 0.0024 to 0.0011 at 10 GHz, as compared to neat PPO resin. Highlights The reported novel hybrid composite offers a promising solution to the limitations of traditional IC packaging materials. The reported hybrid composite exhibits significantly improved thermal conductivity, ultralow dielectric loss, and reduced coefficient of thermal expansion, while maintaining excellent processibility. The thermal conductivity of the composites reaches 2.18 W·m−1 K−1, surpassing that of the neat resin by a factor of 10.9, meanwhile the dielectric loss is as low as 0.0011 at 10 GHz, which is extremely difficult to achieve simultaneously for thermosetting polymer composites. Synergetic effects were realized with the hybridization of fillers with different dimensionality, and proper filler surface modification.

An Improved Thermal Conductivity Polyurethane Composite for a Space Borne 20KV Power Supply

Silver Doped Boron Nitride Approach to Improve the Thermal Conductivity of Polyurethane Composites

Improving the thermal dimensional stability of flexible polymer composite backing materials for ultrasound transducers

Experimental Evaluation and Comparison of Thermal Conductivity of High-Voltage Insulation Materials for Vacuum Electronic Devices

Investigation and Evaluation of High-Temperature Encapsulation Materials for Power Module Applications

Study on aluminum nitride/addition-cure liquid silicone rubber composite for high-voltage power encapsulation

Comparison of two high temperature treatment methods on preparing electrically conductive polysulfide/Ag composites for aerospace sealant applications

Enhanced thermal conductivity of epoxy resin by incorporating three-dimensional boron nitride thermally conductive network.

Hydrogen Bonding and Π-Π Interaction Enhanced High Thermal Interface Design with Low Dielectric Loss of BN/PI/epoxy for High Voltage-High Frequency Insulating Application

Hot-pressing Induced Alignment of Boron Nitride in Polyurethane for Composite Films with Thermal Conductivity over 50 Wm−1 K−1

Polymeric composites and hybrids for high-voltage insulators

Enhancing heat dissipation in polyurethane sheets through the incorporation of freeze‐dried aluminum nitride nanofiber

Improved thermal conductivity of polyurethane (PU)-/SiC composite fabricated via solution casting method and its mechanical model for prediction and comparison

Thermally conductive poly(ether ether ketone)/boron nitride composites with low coefficient of thermal expansion

Dielectric Composite Material with Enhanced Thermal Conductivity Used for Electronic Packaging

Dual Network Structures of Polyurethane/Boron Nitride Nanosheets/Alumina for Improved Thermal Management of Polymers

The Improved Thermal Conductivity of a Potting Material for High-Power Fast Warm-Up Cathodes

Thermally conductive, mechanically robust alumina-incorporated polyurethane films prepared by ultraviolet light curing

Thermal Conductivities of PU Composites with Graphene Aerogels Reduced by Different Methods

Polyphenylene oxide/boron nitride–alumina hybrid composites with high thermal conductivity, low thermal expansion and ultralow dielectric loss

A Low-Cost and High-Efficiency Electrothermal Composite Film Composed of Hybrid Conductivity Fillers and Polymer Blends Matrix for High-Performance Plate Heater