Synergy between Fe-Co oxide catalysts supported over HZSM-5 for direct conversion of methane to methanol

Pranay Rajendra Chandewar,Debaprasad Shee
DOI: https://doi.org/10.1016/j.mcat.2024.114204
IF: 4.6
2024-05-14
Molecular Catalysis
Abstract:The direct conversion of methane to methanol over iron and cobalt oxide based composite catalysts supported over HZSM-5 was carried out in a fixed-bed micro reactor under changing process parameters and catalyst compositions. The prepared catalysts were well characterized by various techniques including N 2 adsorption desorption, X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), pyridine FTIR, X-ray photoelectron spectroscopy (XPS), UV–vis spectroscopy and temperature programmed reduction (H 2 -TPR). The characterization results revealed the presence of various reducible iron and cobalt oxide species depending on the Fe/Co molar ratio and total metal oxide loading. Moreover, the XPS and UV–vis spectroscopic results also confirmed the variation of Fe 2+ /Fe 3+ and Co 2+ /Co 3+ species depending on the Fe-Co molar ratio which had strong influence on the performance of the composite catalysts. It was found that the cobalt species favours the formaldehyde formation whereas the iron species promotes the formic acid formation in their respective pure supported oxide catalysts. However, the synergistic effect of iron and cobalt oxide in equimolar ratio in composite catalysts appeared as effective for achieving highest yield of methanol. The methanol selectivity was also influenced by the alteration of various studied process parameters. The higher reaction temperature favoured the overoxidation of methanol to CO 2 whereas the methanol selectivity increased with increasing the methane to oxygen ratio. The lattice to adsorbed oxygen ratio also had strong influence on the activity of composite catalysts and methanol selectivity. The highest methanol yield of 1.87% was achieved at the methane conversion of 42.81 % with the 20Fe 1 Co 1 Z catalyst at 873 K reaction temperature with CH 4 /O 2 ratio of 2:1 and WHSV of 1030 ml hr −1 gcat −1 .
chemistry, physical
What problem does this paper attempt to address?