Abstract:Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

Standardization Gaps in Powder Feedstock Characterization and Establishing Acceptability for Reuse in Additive Manufacturing

Additive Manufacturing: Assessing Metal Powder Quality Through Characterizing Feedstock and Contaminants

An overview of powder granulometry on feedstock and part performance in the selective laser melting process

Defect and satellite characteristics of additive manufacturing metal powders

Influence of powder characteristics on properties of parts manufactured by metal additive manufacturing

A review of computational modeling in powder-based additive manufacturing for metallic part qualification

Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes

Defects and anomalies in powder bed fusion metal additive manufacturing

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

The effects of powder reuse on the mechanical response of electron beam additively manufactured Ti6Al4V parts

A comparison of particle size distribution and morphology data acquired using lab-based and commercially available techniques: Application to stainless steel powder

Experimental approach for development of a powder spreading metric in additive manufacturing

Strategies for metallic powder reuse in powder bed fusion: A review

The influence of material properties and process parameters on the spreading process in additive manufacturing

Scientific Foundations and Approaches for Qualification of Additively Manufactured Structural Components

Monitoring, Modeling, and Statistical Analysis in Metal Additive Manufacturing: A Review

Powder Reuse in Electron Beam Melting Additive Manufacturing of Ti6Al4V: Particle Microstructure, Oxygen Content and Mechanical Properties

Quantitative Characterization of Metal Powder Morphology, Size Distribution, and Flowability for Additive Manufacturing

Research progress of the metal powder reuse for powder bed fusion additive manufacturing technology

A technical review of the challenges of powder recycling in the laser powder bed fusion additive manufacturing process

A Review of Non-Powder-Bed Metal Additive Manufacturing: Techniques and Challenges