Abstract:Whilst the main focus of metal Additive Manufacturing (AM) aka metal 3D printing has been to produce fully dense parts; the main aim of this research is to use the technology to fabricate metallic permeable parts with controlled porosity characteristics so that they may be used as a high performance, high-pressure and cleanable and therefore "green" reusable filters for various industrial applications. The fusion bed technology, more specifically Direct Metal Printing (DMP) has been utilized to fabricate test parts with porous structure that was later tested for filtration efficiency. In DMP process, the part is built in thin layers with each layer a cross-sectional slice of the shape. This method makes it possible to design and manufacture intricate parts with detailed internal sections that is not always possible with conventional manufacturing methods. The technique also makes it possible to design and manufacture combination of solid and porous sections in one operation or in another word a complete filter assembly to be used straight off the print with no or minimal post processing required. Another advantage of using DMP is the possibility of seamlessly incorporating features like pleats to increase the filtration area, incorporate additional strengthening structures and support structures if required as well as manufacturing a graded media with larger pores on the outside getting finer as you approach the centre. The printing parameters have been selected to achieve optimum combination of tightly controlled pore size range, size distribution and mechanical strength to promote the optimum filtration efficiency and dirt-holding capacity; at the same time maintaining the structural integrity for operation under high pressures, a wide range of flow conditions, operating temperature, and compatibility with a wide range of process fluids. The results from the first round of tests on scaled down samples demonstrated that the fabricated porous metal parts are suitable to be used in a wide range of applications and operating conditions. They are bi-directional in terms of flow and as a result, they are cleanable and reusable. They can be designed to a variety of shapes and sizes with ease and are recyclable if needed. This approach of manufacturing cleanable filters can reduce the demand for new and newly processed materials. In addition, it can reduce production, distribution, and storage costs. Hence less energy usage, less pollution, and less demand for hazardous waste disposal and associated challenges with disposal and the impact on the environment.

Strategies for metallic powder reuse in powder bed fusion: A review

Research progress of the metal powder reuse for powder bed fusion additive manufacturing technology

Developing Four Powder Recycling Strategy for Sustainable Additive Manufacturing 3D Printing Process

The effects of powder reuse on the mechanical response of electron beam additively manufactured Ti6Al4V parts

Progress in metallic powders for laser powder bed fusion

A technical review of the challenges of powder recycling in the laser powder bed fusion additive manufacturing process

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: A review

Re-use of polyamide-12 in powder bed fusion and its effect on process-relevant powder characteristics and final part properties

Material Reuse in Laser Powder Bed Fusion: Side Effects of the Laser—Metal Powder Interaction

Powder Reuse in Electron Beam Melting Additive Manufacturing of Ti6Al4V: Particle Microstructure, Oxygen Content and Mechanical Properties

Maraging steel powder recycling effect on the tensile and fatigue behavior of parts produced through the laser powder bed fusion (L-PBF) process

Numerical investigation on the reuse of recycled powders in powder bed fusion additive manufacturing

Powder reusability in Metal Binder Jetting

A Review of Non-Powder-Bed Metal Additive Manufacturing: Techniques and Challenges

Reuse of Ti6Al4V Powder and Its Impact on Surface Tension, Melt Pool Behavior and Mechanical Properties of Additively Manufactured Components

A review on powder bed fusion technology of metal additive manufacturing

Utilizing Powder Bed Fusion Additive Manufacturing Technology to Fabricate Parts with Controlled Porosity and Permeability Characteristics for Filtration Applications

Effective Ti-6Al-4V Powder Recycling in LPBF Additive Manufacturing Considering Powder History

Influence of the physicochemical properties of reusable powders on the mechanical properties of Ti6Al4V manufactured via laser powder bed fusion additive manufacturing

Metal powder as feedstock for laser-based additive manufacturing: From production to powder modification

The Quest for the Holy Grail Of 3D Printing: A Critical Review of Recycling in Polymer Powder Bed Fusion Additive Manufacturing