Abstract:Although high-speed powder spreading can efficiently enhance the productivity of laser powder bed fusion (LPBF) additive manufacturing, it is rarely used because it is generally believed to be unfavourable for the part quality. However, there is no systematic investigation to confirm this "common sense". In this work, a series of powder spreading and melting experiments are carried out to investigate the role of the spreading speed in LPBF. In the single-layer experiments, the high-speed powder spreading indeed reduces the packing density of the powder layer and seems unfavourable as expected. However, the multilayer LPBF processes of cubic samples with various high powder-spreading speeds are successful, and the samples possess even fewer defects and thus better mechanical properties particularly fatigue life, which is counterintuitive and has never been reported before. To understand the physical mechanisms, we fabricate staircase samples under different powder spreading speeds, revealing the layer-by-layer evolution of the powder bed and deposited dense region. It is found that regardless of the powder spreading speed, the actual powder layer thickness gradually increases due to the shrinkage during powder melting, but always reaches the steady state in ∼10 layers, where the deposited dense layer thickness is equal to the nominal powder layer thickness, thereby achieving similar melting condition and quality. Furthermore, LPBF experiments with intended operational delays in the powder spreading procedure are conducted and prove our speculation that the slightly reduced pores and cracks in the samples fabricated with high-speed powder spreading are mainly attribute to the reduced cooling time between layers and consequently the higher temperature before next-layer melting as well as lower temperature gradients. The major drawback with the higher powder spreading speed is also discussed, which is the reduction of the dimensional accuracy of the fabricated sample along the building direction. This study provides unprecedented insight into the role of powder spreading speed in LPBF and corrects the inaccurate intuition that high-speed powder spreading is always unfavourable, which provides more potential solutions to enhance the productivity and part quality of LPBF.

Numerical investigation on the reuse of recycled powders in powder bed fusion additive manufacturing

Effective Ti-6Al-4V Powder Recycling in LPBF Additive Manufacturing Considering Powder History

Research progress of the metal powder reuse for powder bed fusion additive manufacturing technology

A technical review of the challenges of powder recycling in the laser powder bed fusion additive manufacturing process

Influence of the physicochemical properties of reusable powders on the mechanical properties of Ti6Al4V manufactured via laser powder bed fusion additive manufacturing

The effects of powder reuse on the mechanical response of electron beam additively manufactured Ti6Al4V parts

Powder recycling effects on porosity development and mechanical properties of Hastelloy X alloy during laser powder bed fusion process

Developing Four Powder Recycling Strategy for Sustainable Additive Manufacturing 3D Printing Process

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: A review

Re-use of polyamide-12 in powder bed fusion and its effect on process-relevant powder characteristics and final part properties

Material Reuse in Laser Powder Bed Fusion: Side Effects of the Laser—Metal Powder Interaction

Reuse of Ti6Al4V Powder and Its Impact on Surface Tension, Melt Pool Behavior and Mechanical Properties of Additively Manufactured Components

Maraging steel powder recycling effect on the tensile and fatigue behavior of parts produced through the laser powder bed fusion (L-PBF) process

Strategies for metallic powder reuse in powder bed fusion: A review

In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing

Laser Powder Bed Fusion of Powder Material: A Review

Predicting the chemical homogeneity in laser powder bed fusion (LPBF) of mixed powders after remelting

Powder coarsening mechanisms of Ti-6Al-4 V with multiple build cycles in laser powder bed fusion

Is high-speed powder spreading really unfavourable for the part quality of laser powder bed fusion additive manufacturing?

Evaluation of Inconel 718 Metallic Powder to Optimize the Reuse of Powder and to Improve the Performance and Sustainability of the Laser Powder Bed Fusion (LPBF) Process

Residual oxygen content and powder recycling: effects on microstructure and mechanical properties of additively manufactured Ti-6Al-4V parts