Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aerospace materials like Ti6Al4V and Inconel 718 have exceptional abilities such as high strength, good corrosion resistance, and low specific weight. These properties make them difficult to machine due to rapid tool wear, high cutting forces, and heat generation. Microstructural characterization has been performed for these alloys to identify the phases and precipitates. With the help of machining simulations, experimental trial and error can be avoided. Numerical simulations predict the behavior of materials like Ti6Al4V and Inconel 718 under various machining conditions. They provide insights into stress distribution, temperature rise, and chip formation, which are crucial for understanding how these materials respond to machining. By simulating different cutting parameters (e.g. speed, feed rate, and depth of cut), optimal conditions can be identified to minimize tool wear, improve surface finish, and reduce machining time. Achieving a high-quality surface finish is challenging with these materials. Simulations can predict the impact of different machining parameters on surface integrity, allowing for adjustments before actual machining. Three-dimensional finite element-based machining simulations are performed using the ABAQUS. The current work includes Johnson-Cook damage model parameters included in the simulation with the aid of the program ABAQUS/EXPLICIT. The numerous sets of tests carried out are also stated, along with the workpiece and tool-optimized geometry. The outcomes for cutting forces about time for Ti6Al4V and Inconel 718 are retrieved. The arbitrary Lagrangian–Eulerian approach has been used for these simulations. A coupled thermo-mechanical study is conducted on different sets of materials under various machining conditions. In addition, ultrasonic-assisted cutting on aerospace materials is also being studied, along with a comparison of the cutting forces used by conventional cutting. On the surfaces of aerospace materials that have been machined, temperature and von Mises stress distribution are discussed for both ultrasonic-assisted cutting and conventional cutting. The reaction forces generated for titanium alloy Ti6Al4V under conventional cutting are cutting force (RF3), and the thrust force (RF2) were 56 and 14 N, respectively. For the Inconel 718, the cutting and thrust forces are 75 and 27 N, respectively. The maximum temperature and stress under conventional cutting attained in Ti6Al4V are 670 K and 1.74 GPa, respectively. For the Inconel 718, the maximum temperature and stress under conventional cutting are 596 K and 1.65 GPa. There is a reduction in the forces, maximum temperature, and stress for the ultrasonic-assisted cutting.

The influence of induction-assisted milling on the machining characteristics and surface integrity of γ-TiAl alloys

Comparative study on machinability and surface integrity of γ-TiAl alloy in laser assisted milling

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Molecular dynamics simulation for temperature assisted machining of a polycrystalline γ-TiAl alloy

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Microstructural modulation of TiAl alloys for controlling ultra-precision machinability

A Study on the Optimal Machining Parameters of the Induction Assisted Milling with Inconel 718

Comparative study on micro-milling machinability of titanium alloys prepared by different processes: Forging process, additive manufacturing process and heat-treatment process

Surface micro-texture and tribological properties in longitudinal-torsional ultrasonic-assisted milling Ti2AlNb

Experimental and numerical investigations of aerospace alloys: Effect of machining

Investigation of the effect of electrophoresis-assisted milling on machinability

Integrating Experimental and Computational Analyses for Mechanical Characterization of Titanium Carbide/Aluminum Metal Matrix Composites

Insights into the fatigue property of titanium alloy Ti-6Al-4V in aero-engine from the subsurface damages induced by milling: state of the art

Analysis of tool wear of TiAlN coated tool, machined surface morphology and chip during titanium alloy milling

Effects of roughing, finishing, and aggressive machining conditions on the milling performance of AISI 1045 steel using TiAlN coated inserts

In-situ test of full field deformation and chip formation mechanism during machining of Ti 2 AlNb intermetallic with digital image correlation method

Research on Johnson–Cook Constitutive Model of γ-TiAl Alloy with Improved Parameters

Computational investigation on the surface cutting of γ-TiAl alloy

Effect of reinforced particles on the machinability of Al alloy under MQL, cryogenic, and hybrid lubrication

Research on surface integrity and its influencing factors in the high-speed cutting of typical aluminum/titanium/nickel alloys: a review