Abstract:In this work, the gate controllability of WSe2 channel with varying thickness from monolayer to ten‐layer is investigated, by fabricating van der Waals contacted WSe2 devices. The findings demonstrate negligible hysteresis and excellent subthreshold swing observed when utilizing WSe2 channel thicknesses ≥ five‐layer. However, by reducing the WSe2 channel thickness below the trilayer, the subthreshold swing deviates from the thermal limit. The pursuit of near‐ideal subthreshold swing (SS) ≈ 60 mV dec−1 is a primary driving force to realize the power‐efficient field‐effect transistors (FETs). This challenge is particularly pronounced in 2D material‐based FETs, where the presence of a large interface trap density (Dit) imposes limitations on electrostatic control, consequently escalating power consumption. In this study, the gate controllability of 2D FETs is systematically analyzed by fabricating pre‐patterned van der Waals (vdW)‐contacted p‐FETs, varying the WSe2 channel thickness from monolayer to ten‐layer. As a result, the channel thickness is optimized to achieve efficient gate controllability while minimizing Dit. The findings demonstrate negligible hysteresis and excellent subthreshold swing (SSmin) close to the thermal limit (≈60 mV dec−1), with a corresponding Dit of ≈1010 cm−2 eV−1, comparable to Dit values observed in state‐of‐the‐art Si transistors, when utilizing WSe2 channel thicknesses ≥ five‐layer. However, reducing the WSe2 channel thickness below the trilayer, SSmin (≈91 mV dec−1) deviates from the thermal limit, attributed to a comparatively higher Dit (≈1011 cm−2 eV−1), despite the still lower than values reported for surface‐contacted 2D transistors. Furthermore, all devices exhibit consistent p‐type characteristics, featuring a high ION/IOFF ratio, high mobility, and excellent electrical stability confirmed over several months.

Low-Power Transistors with Ideal p-type Ohmic Contacts Based on VS 2 /WSe 2 van der Waals Heterostructures

Unipolar P-Type Monolayer WSe2 Field-Effect Transistors with High Current Density and Low Contact Resistance Enabled by Van Der Waals Contacts

Low Resistance Ohmic Contact to P-type Monolayer WSe2

High-Performance p-Type Quasi-Ohmic of WSe2 Transistors Using Vanadium-Doped WSe2 as Intermediate Layer Contact

Improvements in 2D p-type WSe2 transistors towards ultimate CMOS scaling

Low Resistance Contact to P-Type Monolayer WSe2

Tunable Snse2/Wse2 Heterostructure Tunneling Field Effect Transistor

A new opportunity for two-dimensional van der Waals heterostructures: making steep-slope transistors

A New Opportunity for 2D van der Waals Heterostructures: Making Steep‐Slope Transistors

2D-2D tunneling field-effect transistors using WSe2/SnSe2 heterostructures

Sub-10 Nm Two-Dimensional Transistors: Theory and Experiment

Performance Improvement in P-Type WS2 Field-Effect Transistors with 1T Phase Contacts

Ohmic MXene Contacts for Symmetric P- and N-Type Monolayer WSe2 Schottky Barrier Field-Effect Transistors

Achieving Near‐Ideal Subthreshold Swing in P‐Type WSe2 Field‐Effect Transistors

All‐van‐der‐Waals Barrier‐Free Contacts for High‐Mobility Transistors

Steep Slope P-Type 2D WSe2 Field-Effect Transistors with Van Der Waals Contact and Negative Capacitance

Controlling phase transition in WSe2 towards ideal n-type transistor

High-Performance Two-Dimensional InSe Field-Effect Transistors with Novel Sandwiched Ohmic Contact for Sub-10 nm Nodes: a Theoretical Study

Schottky barrier heights in two-dimensional field-effect transistors: from theory to experiment

WSe2 N‐Type Negative Capacitance Field‐Effect Transistor with Indium Low Schottky Barrier Contact

High-performance multilayer WSe2 p-type field effect transistors with Pd contacts for circuit applications