Abstract:The global increase in population and rapid urbanization has been followed by a growing generation of municipal solid wastes and construction and demolition sector wastes. This has put increasing pressure on countries around the world to come up with sustainable ways to deal with issues related to waste generation, climate change, and social and environmental degradation. This paper investigates a novel means of co-utilization of municipal solid wastes (MSW) with gypsum wastes from the construction and demolition sector for energy recovery and materials recycling and explores synergistic improvement in their processed value. We investigated high-temperature pyrolysis and gasification under different gasifying environments of inert (N 2 ), 10 % O 2 , 20 % CO 2 , and 70 % H 2 O at two different temperatures of 800 and 900 °C, in a semi-batch fixed bed reactor. Syngas obtained was analyzed for its composition and yield, while the solid residue obtained was analyzed for the crystalline phases of the inorganic content using powder-XRD (X-ray diffraction) diagnostics. These analyses revealed that increasing temperature as well as the addition of gypsum can significantly improve the carbon conversion and overall product gas yields. When comparing the gasifying environments, steam gasification provided increased syngas mass yields by up to 184 %, 425 % and 377 % respectively, as compared to CO 2 gasification, O 2 gasification, and pyrolysis environments. Adding gypsum at equal mass proportions (1:1) to MSW pyrolysis at 900 °C increased the syngas yield by 10 % compared to the non-catalytic case, while adding it at 800 °C reduced syngas yield by 6 % compared to the non-catalyzed pyrolytic case at 800 °C. Adding gypsum during O 2 gasification increased the syngas yield by 25 % compared to the non-catalytic cases at 900 °C and increased by 12.5 % at 800 °C. However, the syngas yield was reduced by 84 % when gypsum was added at equal mass proportions (1:1) to steam gasification of MSW at 900 °C and 50 % for 800 °C. Adding gypsum to CO 2 gasification also reduced the cumulative yield of syngas for both temperatures under investigation. However, the syngas quality was improved with gypsum addition as the yields of hydrocarbon were reduced. The char/solid residue was found to contain significant portions of CaS suggesting sulfur fixation capability of this process into the ash which can improve the ash characteristics in terms of metal recovery along with the improved waste conversion.

The sulfur recovery from gypsums with a higher H 2 /CO syngas byproduct and the CO 2 abatement via an integrated process involving chemical-looping and iodine–sulfur cycle

CO2 Capture and Process Reinforcement by Hydrolysate of Phosphogypsum Decomposition Products

Recovery elemental sulfur from calcium sulfide prepared by red gypsum in sulfuric acid wastewater treatment

Chemical looping combustion of sulfur paste to SO2 by phosphogypsum oxygen carrier for sulfur acid production

Sulfur Transformation and Metals Recovery During Co-Gasification of Municipal Solid Waste and Gypsum

Enhanced Reduction of Smelting Gypsum by H2S and In-Situ DRIFTs Investigated on the Mechanisms of S-O Bond Activation

Experimental Studies on Decomposing Properties of Desulfurization Gypsum in a Thermogravimetric Analyzer and Multiatmosphere Fluidized Beds

Utilization of Desulfurization Gypsum to Producing SO2 and Cao in Multi-Stage Fluidized Bed

Integrated CO2 Capture and Utilization by Combining Calcium Looping with CH4 Reforming Processes: A Thermodynamic and Exergetic Approach

Preparation of calcium carbonate by indirect carbonation desulfurization gypsum with renewable aspartic acid

Gasification of municipal solid wastes with gypsum wastes under different gasifying environments

Preparation of calcium sulfate from recycled red gypsum to neutralize acidic wastewater and application of high silica residue

Effect of gypsum waste inclusion on syngas production during CO2-assisted gasification of waste tires

High Calcium Utilization and Gypsum Formation for Dry Desulfurization Process

FGD-Gypsum Waste to Capture CO2 and to Recycle in Building Materials: Optimal Reaction Yield and Preliminary Mechanical Properties

An Efficient Methodology to Use Hydrolysate of Phosphogypsum Decomposition Products for CO2 Mineral Sequestration and Calcium Carbonate Production

Co-preparation of calcium sulfoaluminate cement and sulfuric acid through mass utilization of industrial by-product gypsum

Recyclable and Efficient Recovery of Ca and S from Phosphogypsum by Using Multistep Precipitation

Simultaneous removal of phosphorus and organic contaminants from phosphogypsum using hydrothermal method for gypsum resource regeneration

Production of SO2 Gas: New and Efficient Utilization of Flue Gas Desulfurization Gypsum and Pyrite Resources

CO2 capture and utilization through isothermal carbonation-calcination looping integrated with MSW pyrolysis volatile reforming