CO2 capture and utilization through isothermal carbonation-calcination looping integrated with MSW pyrolysis volatile reforming

Guicai Liu,Zhifeng Hu,Grzegorz Lisak

DOI: https://doi.org/10.1016/j.cej.2024.149164

IF: 15.1

2024-02-01

Chemical Engineering Journal

Abstract:This work proposed a concept of isothermal carbonation-calcination looping integrated with municipal solid waste (MSW) pyrolysis volatile reforming that achieves CO2 capture, utilization and waste-to-chemicals in a single process. The process was demonstrated in a bench-scale reactor using simulated flue gas and a sorbent-catalyst bi-functional composite Ni/Sr2CeO4. Over 70 % CO2 conversion of flue gas was achieved under 900 °C operation without the formation of CO in the off-gas. Exergy analysis explained the necessity of isothermal configuration due to its lower exergy loss compared with temperature-swing configuration. Furthermore, several bench-scale tests were conducted to improve the understanding of the proposed process. It was found that low oxygen content in feedstocks was crucial to obtain high CO2 conversion, thus MSW is more appropriate than biomass. The presence of O2 in flue gas led to a minor decline of CO2 conversion but effectively prevented CO formation in off-gas, owing to CO oxidation and the redox of Ni-NiO resulting in the alleviation of coke formation. Higher carbonation-reforming temperature facilitated the CO2 conversion, syngas production and the limitation of CO formation in flue gas at 800–900 °C. The decay during extended cycles is due to the growth and deactivation of Ni nanoparticle, instead of the sorbent component.

engineering, chemical, environmental