Cyclic deformation behaviors and microstructure evolution mechanisms of 42CrMo steels under different heat-treatment states
Guoying Sui,Xuming Fang,Hongliang Li,Xian Wu,Chengzhi Zhao,Fengchun Jiang,Zhenqiang Wang
DOI: https://doi.org/10.1016/j.engfailanal.2024.108303
IF: 4
2024-07-01
Engineering Failure Analysis
Abstract:The aim of this paper is to investigate the cyclic deformation behaviors and microstructure evolution mechanisms of 42CrMo steels (which were machined mechanically from the M42 bolt) with various microstructures obtained under four different heat-treatments, i.e., isothermal annealing, annealing, high-temperature tempering and normalizing treatments. Cyclic stress–strain response curves were measured at the uniaxial constant stress- and strain-controlled cyclic loading with positive mean stress/strain. The tested results show that ratchetting can be induced under cyclic loading with positive non-zero mean stress, causing severer fatigue damage. Moreover, it is found that isothermal annealed and annealed 42CrMo steels roughly show cyclic stabilizing features, but tempered and normalized cases present remarkable cyclic softening characteristics. Compared to the formers, the latter two exhibit serious ratchetting and cyclic deformation evolution, which quickens fatigue fracture. Additionally, the microstructure analyses reveal that cyclic stabilizing behavior is mainly related to the dramatic increases in cross-slip dislocation density, substructures, grain refinement and plastic strain. And, cyclic softening behavior is highly correlated with the dislocation development from low-density patterns (i.e., dislocation lines and tangles) to high-density modes (i.e., dislocation cells), as well as dislocation slip through cutting the precipitates. Therefore, we can conclude that cyclic stabilizing/softening features play significant roles in cyclic deformation behavior i.e., ratchetting of 42CrMo steels based on the different microstructure evolution mechanisms, which should be carefully taken into account for optimizing fatigue properties by considering these factors.
engineering, mechanical,materials science, characterization & testing