Abstract:Shock is one of the physical processes that materials are most likely to suffer during applications, therefore the elusive shock properties of nanoglasses are unacceptable. Additionally, establishing gradient microstructure is a promising approach to optimize mechanics properties further. Here, shock characteristics of Cu64Zr36 nanoglasses with gradient microstructures are systematically investigated by molecular dynamics simulations in the particle velocity range of 0.5 to 5 km/s. Two types of gradient nanoglasses (GNGs) along the shock direction are prepared and analyzed, i.e., a negative gradient structure (S1) in contrast with a positive gradient structure (S2). The results show that the number of mechanically stable <0,0,12,0> and <0,1,10,2> atomic Voronoi polyhedra, which are typical building blocks of the amorphous structure in terms of Voronoi tessellation method, in grain interfaces is significantly less than that in grain interiors. As a result, the local free volume gradually changes along the shock direction by the designed gradient structure, which causes a significant impact on the shock wave profiles of shear strain, stress, configurational entropy, and temperature in the GNGs. However, due to a similar chemically-disordered feature in grain interiors and interfaces, the shock wave speeds of nanoglasses are not sensitive to grain sizes under the same shock strength, contrary to the usual shock wave speed mechanism in conventional polycrystalline. Thus, unlike traditional polycrystalline with grain size gradient, the indirect free-surface method of estimating spall strength is still applicable to the GNGs. Finally, the positive gradient structure results in lower temperature and free volume in the spall region, which causes the spall strengths of the S2 sample higher than those of the S1 sample.

Dynamic behaviour of YAG transparent ceramic under ramp wave and shock compression loading up to 20 GPa

Numerical modeling of dynamic response and microcracking in shock-loaded polycrystalline transparent ceramic

Dynamic response of a Li2O-Al2O3-SiO2 transparent glass-ceramic under shock compression

Soft Impact Response of Laminated Glass Plates

Surface fracture behavior and subsurface damage of polycrystalline yttrium aluminum garnet ceramics in Vickers indentation

Dynamic Response Behaviours of Al2O3 Ceramics with Different Grain Sizes under SHPB Compression Loading

Dry sliding behavior of transparent yttrium aluminum garnet against 100Cr6 steel balls

Elastic properties of YAG: First-principles calculation and experimental investigation

Surface Damage Evolution During Transient Thermal Shock of W-2%vol Y2O3 Composite Material in Different Surfaces

Superior optical transparency of nano-grain magnesium aluminate spinel at high shock pressure

Dynamic deformation of Al under shock loading

Experimental and theoretical investigation of failure mechanism in Al 2 O 3 /SiC composite under plane shock waves

Mechanical Properties and Nanoindentation Size Effects of YAG Crystals with Different Crystal Faces

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Dynamic responses in shocked Cu-Zr nanoglasses with gradient microstructure

Preparation of Yag Glass-Ceramic by Combustion Synthesis under High Gravity

Surface Damage and Microstructure Evolution of Yttria Particle-Reinforced Tungsten Plate During Transient Laser Thermal Shock

Preparation and Characterization of Monodispersed and Spherical YAG Powder for Transparent Ceramic by Spray Drying

Shock induced damage and damage threshold of optical K9 glass investigated by laser-driven shock wave

Damage Tolerance and Extensive Plastic Deformation of β‐Yb2Si2O7 from Room to High Temperatures

Explosion/impact Response of Pure Molybdenum at Ultra-High Strain Rate and Large Strains