Abstract:To improve the welding quality of Al/steel joint during resistance spot welding (RSW) process, a CoCrFeNiMn high entropy alloy (HEA) sheet was employed to be an interlayer between aluminum alloy and high strength steel parent metal sheets. Through a series of comparative studies and analyses, the Al/steel spot welded joint obtained from the process with the HEA interlayer had a larger aluminum nugget diameter and thinner intermetallic compound (IMC) layer when compared to a conventional RSW process. When the thicknesses of two parent metal sheets were 1.0 mm or 1.5 mm, the aluminum nugget diameter of the Al/steel spot welded joint with the HEA interlayer were 4.904 mm and 5.962 mm, and respectively increases by 28.41% and 31.32% compared to a conventional RSW process. For the 1.5 mm of the thickness of the parent metal sheets, the HEA interlayer can make the layer thicknesses at the Al/steel faying interface decrease from 3.2 μm to 1.3 μm. Also, adding the HEA interlayer could induce more welding heat energy respectively by 30.74% and 30.34%, and significantly improve the lap-shear strength of the joint by 56.95% and 52.09% for two thicknesses of the parent metal sheets. Even increasing welding current of the process without HEA interlayer to make its calculated welding heat energy the same as that with HEA interlayer, the Al/steel joint obtained from the process with HEA interlayer still had a higher lap-shear strength. In addition, by seriously observing and analyzing the fracture surfaces obtained from processes with and without the HEA interlayer, it could be concluded that the HEA interlayer could improve the fracture mode of the Al/steel joint from interfacial fracture to button fracture, so the quality of the Al/steel joint could be improved. This work can supply an effective method to improve the dissimilar metals welding process.

Microstructure and Properties of ZGMn13Mo/A514 Dissimilar Steel Multi-pass Welding

Microstructure of a Domestically Fabricated Dissimilar Metal Weld Joint (SA508-52M-309L-CF8A) in Nuclear Power Plant

Microstructure and mechanical properties of dissimilar steel welded joint of martensite stainless steel and low alloy steel

Effects of resistance spot welding parameters on microstructure and mechanical properties of the dissimilar welded joint of quenching and partitioning steels

Microstructure Evolution and Mechanical Properties of Laser Welded Dissimilar/Similar Joints Between Medium‐Mn Transformation‐Induced Plasticity Steel and DP980/22MnB5 Steels

Microstructure and Mechanical Properties of Weld-Bonded and Resistance Spot Welded Magnesium-to-steel Dissimilar Joints

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal

Microstructure Correlation and Fatigue Crack Growth Behavior in Dissimilar 9cr/crmov Welded Joint

Microstructure and Fatigue Properties of Mg-To-Steel Dissimilar Resistance Spot Welds

Study of microstructure and mechanical properties of high thickness A844/A516 steel joints by multi-pass GMAW for pressure vessels

Microstructure and Properties in Dissimilar/similar Weld Joints Between DP780 and DP980 Steels Processed by Fiber Laser Welding

Microstructure and Impact Mechanical Properties of Multi-Layer and Multi-Pass TIG Welded Joints of Al−Zn−Mg Alloy Plates

Microstructure and Mechanical Properties of the Ternary Gas Shielded Narrow-Gap GMA Welded Joint of High-Strength Steel

Microstructure characteristics and mechanical properties of Al/Mg joints manufactured by magnetic pulse welding

Evolution of Microstructure and Mechanical Properties of a Dissimilar Aluminium Alloy Weldment

Microstructure of a Safe-End Dissimilar Metal Weld Joint (SA508-52-316L) Prepared by Narrow-Gap GTAW

A comparative study of the microstructure and properties of 800 MPa microalloyed C-Mn steel welded joints by laser and gas metal arc welding

Microstructure and mechanical properties of resistance spot welded dissimilar aluminum/steel joints fabricated using high entropy alloy as interlayer

Interfacial Microstructure and Mechanical Properties of AZ31B/AA7075 Joints Using Non-Equilibrium Thermal Compensation Resistance Welding

Microstructure and Mechanical Properties of Dissimilar Friction Stir Lap Welding Between AZ31 Mg Alloy and DC01 Steel

Analyzing microstructural, residual stress, and mechanical characteristics in dissimilar welds of Inconel 59 and AISI 904L through double-pulsed gas metal arc welding