Abstract:Additive manufacturing, or 3D printing, of the bioresorbable polymer [Formula: see text]-polycaprolactone (PCL) is an emerging tissue engineering solution addressing patient specific anatomies. Predictively modeling the mechanical behavior of 3D printed parts comprised of PCL improves the ability to develop patient specific devices that meet design requirements while reducing the testing of extraneous design variants and development time for emergency devices. Predicting mechanical behavior of 3D-printed devices is limited by the variability of effective material moduli that are determined in part by the 3D printing manufacturing process. Powder fusion methods, specifically laser sintering, are known to produce parts with internal porosity ultimately impacting the mechanical performance of printed devices. This study investigates the role of print direction and part size on the material and structural properties of laser sintered PCL parts. Solid PCL cylinders were printed in the XY (perpendicular to laser) and Z direction (parallel to laser), scanned using microcomputed tomography, and mechanically tested under compression. Compositional, structural, and functional properties of the printed parts were evaluated with differential scanning calorimetry, gel permeation chromatography, microcomputed tomography, and mechanical testing. Computational models of printed and scanned cylinders were fit to experimental data to derive effective moduli. Effective moduli were used to predict the mechanical behavior of splints used for emergency repair of severe tracheobronchomalacia. Laser sintering did not cause significant differences in polymer material properties compared to unmanufactured powder. Effective moduli (Eeff) were greater for larger part sizes (p < 0.01) and for parts oriented in the XY direction compared to the Z direction (p < 0.001). These dependencies were congruent with the differences in void volumes associated with the print direction (p < 0.01) and part size (p < 0.01). Finite element models of splint parallel compression tests utilizing the Eeff dependent on print direction and size agreed with experimental closed compression tests of splints. Evaluating the microstructural properties of printed parts and selecting effective moduli for finite element models based on manufacturing parameters allows accurate prediction of device performance. These findings allow testing of a greater number of device design variants in silico to accomodate patient specific anatomies towards providing higher quality parts while lowering overall time and costs of manufacturing and testing.

On 3D printed novel stifle prosthesis for canines

Histological Evaluation of Osteogenesis of 3D-Printed Poly-Lactic-Co-Glycolic Acid (plga) Scaffolds in A Rabbit Model

Investigations on 3D Printed Novel Stifel Prosthesis as IoT-Based Solution

3D Printing Surgical Implants at the Clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction

Personalized 3D-printed endoprostheses for limb sparing in dogs: Modeling and in vitro testing

A preliminary study of the mechanical properties of 3D-printed personalized mesh titanium alloy prostheses and repair of hemi-mandibular defect in dogs

Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

Fabrication of Low Cost Soft Tissue Prostheses with the Desktop 3D Printer

An Individually Designed Custom-Made Mandibular Condyle Prosthesis Using Selective Laser Melting: Finite Element Analysis

Design and Development of 3D-Printed Personalized Femoral Prosthesis Technologies

Pilot Test of a Definitive Prosthetic Socket Made with 3D Printing Technology

Additive Manufacturing of a Super Toughened Biodegradable Polymer Blend: Structure–Property-Processing Correlation and 3D Printed Prosthetic Part Development

Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application

An Insight into the Characteristics of 3D Printed Polymer Materials for Orthoses Applications: Experimental Study

Multidisciplinary topology and material optimization approach for developing patient-specific limb orthosis using 3D printing

Evaluating Directional Dependency of Selective Laser Sintered Patient Specific Biodegradable Devices to Improve Predictive Modeling and Design Verification

In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial

Experimental analysis and numerical fatigue life prediction of 3D-Printed osteosynthesis plates

Effect of meta-structure on mechanical properties of polyvinylidene fluoride composite-based 3D printed intramedullary pins

EXPLORING THE FUTURE OF PROSTHETICS AND ORTHOTICS: HARNESSING THE POTENTIAL OF 3D PRINTING

Patient-specific implants made of 3D printed bioresorbable polymers at the point-of-care: material, technology, and scope of surgical application