Abstract:BACKGROUND AND OBJECTIVES: 3-Dimensional (3D) printing has become a common tool to aid implant molding for cranioplastic surgery of large skull defects. Until now, 3D printing of cranial implants itself has not been used, mainly because of medicolegal concerns. With a 3D printer developed for printing medical applications and with implant-grade polyetheretherketone (PEEK) filament available, we established a workflow (in compliance with medical device regulations) to 3D print cranial implants for cranioplastic surgery directly at the point of care (POC). Here, we describe the implementation of 3D printing these PEEK implants for cranioplastic surgery at our academic hospital. METHODS: A thorough design and 3D printing process, in accordance with local medical device regulations, was developed. Implants are digitally designed based upon pre- and post-craniectomy cranial computed tomography scans by trained 3D printing experts from the department of medical engineering at our institution. Implants are then produced on a medical 3D printer with implant-grade PEEK filament using the fused filament fabrication process. After postprocessing and steam sterilization, implantation for reconstruction of the skull can be performed. RESULTS: Cranioplastic surgery with a 3D-printed PEEK implant was performed at our institution in a patient with a large frontotemporoparietal skull defect after traumatic brain injury with consecutive decompressive craniectomy. No intra- or post-operative complications occurred. Postoperative cranial computed tomography scans showed perfect reconstruction of precraniectomy skull shape. The aesthetic result was promising and satisfactory to the patient. CONCLUSION: This novel 3D printing workflow enables the production of patient-specific cranial implants from PEEK, to reconstruct large skull defects directly at the POC in accordance with the European Medical Device Regulation. This marks an unprecedented technological and legal advancement, enabling the hospital infrastructure not only to deliver the cranioplastic surgery itself, but also additive manufacturing of the implant directly at the POC.

In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial

Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application

Patient-specific implants made of 3D printed bioresorbable polymers at the point-of-care: material, technology, and scope of surgical application

Point-of-Care 3-Dimensional–Printed Polyetheretherketone Customized Implants for Cranioplastic Surgery of Large Skull Defects

3D Printing Surgical Implants at the Clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction

Quantitative Assessment of Point-of-Care 3D-Printed Patient-Specific Polyetheretherketone (PEEK) Cranial Implants

Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

Printing@Clinic: from Medical Models to Organ Implants

Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion - A clinical perspective

Point-of-Care 3D Printing: A Feasibility Study of Using 3D Printing for Orthopaedic Trauma

Design and Development of 3D-Printed Personalized Femoral Prosthesis Technologies

Fused Deposition Modeling PEEK Implants for Personalized Surgical Application: From Clinical Need to Biofabrication

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach

Polyether-Ether-Ketone (PEEK) and Its 3D-Printed Quantitate Assessment in Cranial Reconstruction

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants

3D printed Polyether ether ketone (PEEK), Polyamide (PA) and its evaluation of mechanical properties and its uses in healthcare applications.

High-Temperature Polylactic Acid Proves Reliable and Safe for Manufacturing 3D-Printed Patient-Specific Instruments in Pediatric Orthopedics—Results from over 80 Personalized Devices Employed in 47 Surgeries

Device Design and Diagnostic Imaging of Radiopaque 3D Printed Tissue Engineering Scaffolds

Custom design and biomechanical analysis of 3D-printed PEEK rib prostheses

A Review of the Current State of the Art of Polyether Ether Ketone (PEEK) Composite Based 3D-Printed Biomedical Scaffolds

3D printing of PEEK–cHAp scaffold for medical bone implant