Abstract:The study investigates the density, phase composition, microstructure and mechanical properties (microhardness, fracture toughness) of binderless WC + SiC and WC + SiC + C ceramics obtained by Spark Plasma Sintering (SPS). Nanopowders of a-WC produced by DC arc plasma chemical synthesis were used as raw materials. Powder compositions for sintering contained graphite (0.3, 0.5% wt.) or b-SiC (1, 3, 5% wt.) with 0.3% wt. graphite. It was shown that WC + 1% wt. SiC + 0.3% wt.C ceramics have a homogeneous fine-grained microstructure, high relative density, increased microhardness and Palmquist fracture toughness (Indentation Fracture Resistance). The kinetics of the initial sintering stage of WC + C and WC + C + SiC powder compositions was also analyzed using high-temperature dilatometry at the conventional pressureless sintering (CPS) conditions. The CPS and SPS activation energies of WC + SiC powder at the intensive shrinkage stage were determined using the Young-Cutler model. The CPS activation energies of WC, WC + C and WC + C + SiC powder compositions are close to the activation energy of diffusion of the carbon C along the a-WC grain boundaries. The SPS activation energies of WC + C and WC+ C + SiC powder compositions turn out to be lower than the activation energy of the C of a-WC grain boundary.

Thickness effects on the sinterability, microstructure, and nanohardness of SiC‐based ceramics consolidated by spark plasma sintering

Investigation of the effect of pressure, sintering temperature and time on silicon carbide microstructure

Effect of the SiC powder microscopic morphology on properties of Si/SiC ceramics prepared by spark plasma sintering

The influence of carbon source and content on structure and mechanical properties of sic processed via spark plasma sintering method

Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C

The Effect of SiC Content on Microstructure and Microwave Heating Rate of h-BN/SiC Ceramics Fabricated by Spark Plasma Sintering

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

Effect of SiC on Microstructure, Phase Evolution, and Mechanical Properties of Spark-Plasma-Sintered High-Entropy Ceramic Composite

Microstructure and Mechanical Properties of the Spark Plasma Sintered Tac/Sic Composites: Effects of Sintering Temperatures

Densification and Mechanical Properties of Tic by Sps-Effects of Holding Time, Sintering Temperature and Pressure Condition

Effect of temperature on the structure and mechanical properties of SiC–TiB2 composite ceramics by solid-phase spark plasma sintering

Novel (ti, W)C–SiC–WSi2 Ceramics Fabricated Via in Situ Reaction Spark Plasma Sintering at 1600 °C

Densification and Enhancement of Sic Particulate Reinforced Fine Grain Sic Ceramic

Combined effect of SiC and carbon on sintering kinetics, microstructure and mechanical properties of fine-grained binderless tungsten carbide

The dependence of interlocking and laminated microstructure on toughness and hardness of β-SiC ceramics sintered at low temperature

Structure and Properties of Spark Plasma Sintered SiC Ceramics with Oxide Additives

Enhanced toughness and hardness at cryogenic temperatures of silicon carbide sintered by SPS

Processing and Characterization of SiB0.5C1.5N0.5 Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Microstructure and mechanical properties of SiC–mullite nanocomposite prepared by spark plasma sintering

Microstructural, electrical, and mechanical properties of conductive SiC ceramics fabricated by spark plasma sintering

Fabrication and Property of SiC Ceramic with Large Thickness/Diameter Ratios