Abstract:Refractory metal carbides TiC, ZrC, HfC, NbC and TaC have excellent physical, chemical and mechanical properties as materials for ultra-high temperature ceramics. Of these, the most refractory are TaC and HfC, whose melting points approach 4000°C. It should be noted the high hardness, strength and wear resistance of refractory carbides. Hence, there is a natural interest in high-entropy carbides based on them, which are becoming an important class of new ceramic materials, since they potentially have more advanced applied properties. However, obtaining such materials by classical metallurgical methods is a difficult task. In modern research, samples of high-entropy carbides are most often synthesized using expensive special equipment (methods of plasma-spark sintering, high-energy planetary mills, etc.) and a relatively long preparation of precursors for sample production. This paper describes a new approach to the synthesis of multicomponent carbide (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C using an electrochemical process at a temperature not exceeding 1173 K. The method is based on the phenomenon of currentless metal transfer in molten salts. After the step-by-step transfer of metals, the sample was washed from the electrolyte, then sintered in a vacuum furnace. According to X-ray phase analysis, the resulting high-entropy carbide is a single-phase solid solution with an FCC structure. The diffraction pattern of the synthesized sample is in good agreement with the calculated diffraction pattern obtained by the Debye formula for a supercell of 64 000 atoms. A compact sample of high-entropy carbide was produced by pressing a tablet 10 mm in diameter with the addition of cobalt as a matrix metal. After vacuum sintering, the sample was ground to prepare for examination on a scanning electron microscope. Elemental mapping of the sample surface was performed, which showed a satisfactory distribution of metals that make up the high-entropy carbide. The measured microhardness of the sample turned out to be less than the values found in the publications of other authors, which may be due to some residual sample porosity.

Self-Propagating High-Temperature Synthesis of High-Entropy Carbides in the Gasless Thermal Explosion Mode

PRODUCING METHOD OF HIGH ENTROPY CARBIDE IN AN IONIC MELT

Low‐temperature Molten Salt Synthesis of High‐entropy Carbide Nanopowders

Facile Electrochemical Synthesis of Nanoscale (TiNbTaZrHf)C High-Entropy Carbide Powder

Machine-learning Driven Synthesis of TiZrNbHfTaC5 High-Entropy Carbide

Synthesis and Mechanical and Elevated Temperature Tribological Properties of a Novel High-Entropy (tivnbmow)c 4.375 with Carbon Stoichiometry Deviation

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Turning of high entropy alloy into high entropy carbides by modifying carbon content during reactive sintering

Synthesis of high-entropy carbides (TiTaNb)xHfyZrzC with strong thermal-oxidative resistant properties by mechanical alloying and spark plasma sintering

Low temperature synthesis and densification of (Ti,V,Nb,Ta,Mo)(C,N) high-entropy carbonitride ceramics

Self-Propagating High-Temperature Synthesis in a Ti−Al−C Powder System Using Different Carbon Precursors

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Entropy Landscaping of High-Entropy Carbides

Features of SHS of multicomponent carbides

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Exothermic Synthesis of Binary Solid Solutions Based on Hafnium and Zirconium Carbides

High-entropy carbonitride (Hf,Ta,Nb,Zr)(C,N): One step mechanically induced self-sustaining reaction and spark plasma sintering

Large‐Scale Synthesis and Applications of Hafnium–Tantalum Carbides

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C

Stability and mechanical properties of single-phase quinary high-entropy metal carbides: First-principles theory and thermodynamics