Abstract:Refractory metal carbides TiC, ZrC, HfC, NbC and TaC have excellent physical, chemical and mechanical properties as materials for ultra-high temperature ceramics. Of these, the most refractory are TaC and HfC, whose melting points approach 4000°C. It should be noted the high hardness, strength and wear resistance of refractory carbides. Hence, there is a natural interest in high-entropy carbides based on them, which are becoming an important class of new ceramic materials, since they potentially have more advanced applied properties. However, obtaining such materials by classical metallurgical methods is a difficult task. In modern research, samples of high-entropy carbides are most often synthesized using expensive special equipment (methods of plasma-spark sintering, high-energy planetary mills, etc.) and a relatively long preparation of precursors for sample production. This paper describes a new approach to the synthesis of multicomponent carbide (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C using an electrochemical process at a temperature not exceeding 1173 K. The method is based on the phenomenon of currentless metal transfer in molten salts. After the step-by-step transfer of metals, the sample was washed from the electrolyte, then sintered in a vacuum furnace. According to X-ray phase analysis, the resulting high-entropy carbide is a single-phase solid solution with an FCC structure. The diffraction pattern of the synthesized sample is in good agreement with the calculated diffraction pattern obtained by the Debye formula for a supercell of 64 000 atoms. A compact sample of high-entropy carbide was produced by pressing a tablet 10 mm in diameter with the addition of cobalt as a matrix metal. After vacuum sintering, the sample was ground to prepare for examination on a scanning electron microscope. Elemental mapping of the sample surface was performed, which showed a satisfactory distribution of metals that make up the high-entropy carbide. The measured microhardness of the sample turned out to be less than the values found in the publications of other authors, which may be due to some residual sample porosity.

Low‐temperature Molten Salt Synthesis of High‐entropy Carbide Nanopowders

Influence of (Ta Nb Ti V) C powders synthesized by molten salt at low temperature on densification and properties of high entropy carbide ceramics

High-entropy Metal Carbide Nanowires

Low temperature synthesis of high‐entropy (Hf0.2Ti0.2Mo0.2Ta0.2Nb0.2)B2 powders combined with theoretical forecast of its elastic and thermal properties

Facile Electrochemical Synthesis of Nanoscale (TiNbTaZrHf)C High-Entropy Carbide Powder

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Synthesis of High‐entropy Diboride Nanopowders Via Molten Salt‐mediated Magnesiothermic Reduction

A simple route to synthesize high-entropy carbide (Hf0.2Zr0.2Ti0.2Ce0.2La0.2)C1-δ nanoparticles with large covalent radius difference

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

One‐step Synthesis of Coral‐like High‐entropy Metal Carbide Powders

Study on the rapid synthesis of high-entropy carbonitride powder and its remarkable hardening effects on cemented carbide tool materials

PRODUCING METHOD OF HIGH ENTROPY CARBIDE IN AN IONIC MELT

A Facile Route for the Synthesis of High‐entropy Transition Carbides/borides at Low Temperatures

High-entropy Alumino-Silicides: a Novel Class of High-Entropy Ceramics

A New Sight on The Influence of Molten Salt in The Preparation of (Ta, Nb, Ti) C Nano‐Powder

High-entropy carbide-nitrides with enhanced toughness and sinterability

Machine-learning Driven Synthesis of TiZrNbHfTaC5 High-Entropy Carbide

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

First-principles Study, Fabrication, and Characterization of (hf0.2zr0.2ta0.2nb0.2ti0.2)c High-Entropy Ceramic

The effect of submicron grain size on thermal stability and mechanical properties of high‐entropy carbide ceramics