Abstract:Polymeric integrated optical devices, including microring resonator optical filters and Mach−Zehnder interferometer modulators, fabricated by electron-beam lithography and soft lithography are considered in this article. Microring resonator optical filters made of SU-8 (MicroChem, Newton, MA), directly patterned by electron-beam lithography, demonstrate that SU-8 is a good candidate for high-precision, easily fabricated, and good-optical-quality passive integrated optical devices. Due to the electron-beam lithography process, the coupling between the straight waveguide and the microring resonator is precisely controlled, and the critical coupling condition can be achieved. Additionally, films containing several devices patterned by electron-beam lithography are peeled from the silicon substrate, yielding ultrathin all-polymer flexible free-standing microring resonator optical filters exhibiting up to −27 dB filtering extinction. Using a PDMS stamp, molded from these electron-beam-patterned microring resonator optical filters, identical replicas are fabricated by the soft lithography molding technique. Soft lithography is also applied to active polymer materials. A short 2-mm active-section prototype Mach−Zehnder interferometer modulator is made by the replica molding process, using CLD-1/APC electrooptic polymer as the core material. A reasonable intensity-modulation effect is observed by applying voltage to one arm of the interferometer.

Fabrication of alignment structures for a fiber resonator by use of deep-ultraviolet lithography

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

A New Route for Fabricating Polymer Optical Microcavities.

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Monolithic Integration of a High-Quality Factor Lithium Niobate Microresonator with a Free-Standing Membrane Waveguide Using Femtosecond Laser Assisted Ion Beam Writing (FLAIBW)

Fabrication of Microresonators of High Q/V Ratios Using Femtosecond Laser Micromachining

Novel Device of Passive and Fixed Alignment of Optical Fiber Using SU-8 Photoresist

Fusion Spliced Microfiber Closed-Loop Resonators

More-than-Moore Microacoustics: A Scalable Fabrication Process for Suspended Lamb Wave Resonators

Diffractive Broadband Coupling into High-Q Resonant Cavities

A Novel Device of Passive and Fixed Alignment of Optical Fiber

Integration of an optical fiber taper with an optical microresonator fabricated in glass by femtosecond laser 3D micromachining

Microresonator devices lithographically introduced at the optical fiber surface

Surface Nanoscale Axial Photonics: Robust Fabrication of High-Quality-factor Microresonators.

Ultrafast Laser 3D Nanolithography of Fiber-Integrated Silica Microdevices

Fabrication of three-dimensional microdisk resonators in calcium fluoride by femtosecond laser micromachining

Fabrication and Replication of Polymer Integrated Optical Devices Using Electron-Beam Lithography and Soft Lithography

Improvements in Fabrication of 3D SU-8 Prisms for Low-Coupling-Loss Interconnections Between Fibers and Waveguides

Ultra-smooth micro-optical components of various geometries.