Abstract:In this study, heterocyclic diamine 2-(4-aminophenyl)-5-aminobenzimidazole (APBIA) was employed as a co-polymerization component to improve the properties of polyimide foams (PIFs) which were synthesized from 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA) and 4,4′-diaminodiphenyl ether (ODA). The rheological behavior of polyester ammonium salt (PEAS) precursors was regulated by introducing APBIA moieties to the chain backbones, which affected the foaming behavior of PEAS and the microstructure of corresponding PIFs. Anisotropic porous structure was constructed with the help of microwave-assisted foaming strategy due to the directional growth of foam pores, which led to anisotropic mechanical and thermal insulation performance of resultant PIFs. PIFs demonstrated robust mechanical performance in the vertical direction (i.e., parallel to pore growth direction) and mechanical flexibility (compression response rate of 97.1–99.0 %) in the horizontal direction (i.e., perpendicular to the pore growth direction). The co-polymerized PIFs also presented excellent thermal insulation performance, with thermal conductivity ranging from 0.0266 to 0.0517 W/(m·K) within a temperature range of 25∼300 °C. In addition, PIFs exhibited exceptional thermal stability and flame retardancy performance, which demonstrate a great potential for high-temperature thermal protection applications. To summarize, multifunctional PIFs with excellent mechanical, thermal insulation and flame retardancy were successfully prepared by adopting co-polymerization strategy and microwave-assisted foaming technique, which have promising applications in high-end engineering sectors.

Dual Cross-Linked Networks Reinforced Polyimide Foams with Outstanding Piezoelectric Properties and Heat Resistance Performance

Preparation and Dielectric Properties of Polyimide Foams Containing Crosslinked Structures

Polyimide Foams with Ultralow Dielectric Constants

Fabrication of multifunctional polyimide foams with co-polymerized benzimidazole moieties for excellent thermal insulation and flame retardancy applications

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Bio-Based Poly(Imine-Amide) Materials with Dynamic Covalent Adaptable Networks: Toward Conductive Composites and Thermally Moldable Microcellular Foams

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Solvent Resistant Self-Crosslinked Poly(ether Imide)

Closed-Cell Rigid Polyimide Foams for High-Temperature Applications: The Effect of Structure on Combined Properties

Fabrication of Rigid Isocyanate-Based Polyimide Foam Achieved Excellent Use Safety via Synergy between Expandable Graphite and Phosphorus-Containing Polyol

Structural Optimization of Polyimide Foam via Composition with Hyperbranched Polymer Modified Fluorinated Carbon Nanotubes

Fabrication of Lightweight Polyimide Foams with Exceptional Mechanical and Thermal Properties

Mechanically Reinforced Rigid Polyimide Foam via Chemically Grafting Isocyanate Acid for Ultrabroad Band Microwave Absorption

Fabrication of rigid polyimide foams via thermal foaming of nadimide-end-capped polyester-amine precursor

Hybrid Polyimide Foams with Hyperbranched Organosilicon for High-Temperature Sound Absorption

Chemically crosslinked polyimide-POSS hybrid: A dielectric material with improved dimensional stability and dielectric properties

Highly efficient thermal insulation polyimide foams enhanced by cation-π interactions

High Electrical and Mechanical Properties Obtained in A Polyimide Based Nanocomposite with Sandwich Structure via Multi‐Dimensional Design

Fabrication of flame-retardant and smoke-suppressant isocyanate-based polyimide foam modified by silica aerogel thermal insulation and flame protection layers

Enhanced Interfacial and Dielectric Performance for Polyetherimide Nanocomposites through Tailoring Shell Polarities

Lightweight thermo- and heat-resistant composite materials based on polyimide foam