Abstract:The significant characteristics of the nickel-based Inconel 718 (IN718) superalloy are high strength, fatigue capacity, rupture strength, corrosion resistance, and creep resistance at temperatures exceeding 650 °C, which opens the application of IN718 for aircraft parts. The mechanical properties and surface residual stress (SRS) of the IN718 superalloy have been affected by fabrication and post-processing procedures, which shorten the service life of components. For the fabrication of complex aviation components, additive manufacturing of aerospace materials like IN718 has opened up new production techniques. However, localized melting and solidification produce anisotropy microstructure and a crystallographic texture with substantial tensile residual stress. These are responsible for mechanical anisotropy and pose metrological challenges for diffraction-based SRS detection. Knowing the magnitude and nature of SRS is crucial since they affect a mechanical properties and life of the parts. In this study, IN718 alloys were fabricated using the laser-based powder bed fusion (L-PBF) technique, and the impact of the standard ageing heat treatment (SAHT) process was assessed. The as-fabricated (AF) IN718 microstructure was found to have columnar dendritic structure and Laves phases in the interdendritic regions along the build direction. The SAHT sample microstructure led to the homogeneous precipitation of γ ′ and γ ′′ strengthening phases with δ and brittle Laves phases in grain boundaries. The average grain size of 41.56 μm in AF samples was increased to 44.80 μm after SAHT. The reduction of dislocation movements resulted in converting low angle grain boundaries found in the AF sample to high angle grain boundaries. SAHT samples displayed cubical texture along the and directions in the (001) plane. Following SAHT, there were increases in yield and ultimate tensile strength of 26.44% and 44.74%, respectively. On the other hand, the degree of elongation decreased to 36.19%. TRS in AF samples was converted into compressive surface residual stress following SAHT due to the phase transition. The process–structure–property relationship and the impacts of SAHT on the mechanical characteristics of the IN718 produced by L-PBF have been improved upon through this study.

Microstructural Evolution and Mechanical Behavior during Isothermal Multiaxial Forging of Nickel-Based Superalloy SUPERNI 718

Investigations on microstructure, crystallographic texture evolution, residual stress and mechanical properties of additive manufactured nickel-based superalloy for aerospace applications: role of industrial ageing heat treatment

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Systematic Analysis of Distinct Flow Characteristics and Underlying Microstructural Evolution Mechanisms of a Novel Fine-Grained P/M Nickel-Based Superalloy During Isothermal Compression

Mechanical alloying and direct powder forging of Ni–20Cr–20Fe-0.08C alloy

A Study on Microstructure and Mechanical Properties of Inconel 718 Superalloy Fabricated by Novel CMT-WAAM Process

Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion

Effect of Deformation Degree on Microstructure and Properties of Ni-Based Alloy Forgings

Influence of Forging and Heat Treatment on the Microstructure and Mechanical Properties of a Heavily Alloyed Ingot-Metallurgy Nickel-Based Superalloy

Microstructure optimization for improving creep resistance of additively manufactured Ni-based superalloy IN939 through heat treatment

Effect of Post-Deformation Heat Treatment on the Microstructure and Properties of Inconel 617 Alloy

A critical review on the microstructure and mechanical properties correlation of additively manufactured nickel-based superalloys

Effect of deformation and annealing process on microstructure and properties of Inconel 718 foil

Effect of heat treatment on the morphology and mechanical properties of the novel Ni-based superalloy with machinability assessment through electrical discharge machining

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

High Strength and Ductility Achieved in Friction Stir Processed Ni-Co Based Superalloy with Fine Grains and Nanotwins

Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms

Effect of treatment mode on microstructure evolution and mechanical properties of nickel-based superalloy fabricated by selective laser melting

Wear mechanism, subsurface structure and nanomechanical properties of additive manufactured Inconel nickel (IN718) alloy

Microstructural evolution and mechanical properties of Inconel 718 alloy manufactured by selective laser melting after solution and double aging treatments