Abstract:It has been said that 'God invented plasticity, but the Devil invented fracture!' Both mechanisms represent the two prime modes of structural failure, respectively, plastic collapse and the rupture/breaking of a component, but the concept of developing materials with enhanced resistance to fracture can be difficult. This is because fracture resistance invariably involves a compromise-between strength and ductility, between strength and toughness-fundamentally leading to a 'conflict' between nano-/micro-structural damage and the mechanisms of toughening. Here, we examine the two major classes of such toughening: (i) intrinsic toughening, which occurs ahead of a crack tip and is motivated by plasticity-this is the principal mode of fracture resistance in ductile materials, and (ii) extrinsic toughening, which occurs at, or in the wake of, a crack tip and is associated with crack-tip shielding-this is generally the sole mode of fracture resistance in brittle materials. We briefly examine how these distinct mechanistic processes have been used to toughen synthetic materials-intrinsically in gradient materials and in multiple principal-element metallic alloys with the example of metallic glasses and high-entropy alloys, and extrinsically in ceramics with the example of ceramic-matrix composites-in comparison to Nature which has been especially adept in creating biological/natural materials which are toughened by one or both mechanistic classes, despite often consisting of constituents with meagre mechanical properties. The success of Nature has been driven by its ability to cultivate the development of materials with multiple length-scale hierarchical structures that display ingenious gradients and structural adaptability, a philosophy which we need to emulate and more importantly learn to synthesize to make structural materials of the future with unprecedented combinations of mechanical properties. This article is part of a discussion meeting issue 'A cracking approach to inventing new tough materials: fracture stranger than friction'.

Elastomers Fail from the Edge

Strain-stiffening elastomers fail from the edge

Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths

Fracture and Fatigue Characteristics of Monodomain and Polydomain Liquid Crystal Elastomers

From Fibrils to Toughness: Multi-Scale Mechanics of Fibrillating Interfaces in Stretchable Electronics

Complexity of crack front geometry enhances toughness of brittle solids

Size-dependent fracture in elastomers: experiments and continuum modeling

Essential work of fracture of soft elastomers

Interfacial fatigue fracture of elastomer bilayers under cyclic large deformation

Crosslinking degree variations enable programming and controlling soft fracture via sideways cracking

Quantifying and mapping covalent bond scission during elastomer fracture

Resolving stress state at crack tip to elucidate nature of elastomeric fracture

The poker-chip experiments of synthetic elastomers

Predicting fracture energies and crack-tip fields of soft tough materials

Toughening materials: enhancing resistance to fracture

Pinning cracks by microstructure design in brittle materials

Integrating Ultrathin Perovskite Nanosheets for Rigid yet Fatigue‐Resistant Elastomers

Deformation and tearing of graphene-reinforced elastomer nanocomposites

The poker-chip experiments of synthetic elastomers explained

Concurrent factors determine toughening in the hydraulic fracture of poroelastic composites

Flaw-sensitivity of a tough hydrogel under monotonic and cyclic loads