Abstract:In various applications of stretchable electronics and soft robots, soft materials are subjected to long-term loadbearing conditions, requiring them to possess good extreme mechanical properties such as highly stretchable, strong, fracture-resistant and anti-fatigue. Conventional soft materials with a single polymer network typically exhibit relatively low fracture resistance, while commonly employed toughening method involves introducing mechanical dissipation into original polymer networks often require complicated chemical synthesis and result in significant hysteresis under cyclic loads. Designing soft solid materials into soft network materials with periodic lattice structure paving another effective route to improve the fracture-resistant performance of soft materials, which has not been reported in the literature. This work provides a combined experimental and computational study on the mechanical properties and fracture behaviors of elastomer-based soft network materials with/ without a precut crack under monotonic and cyclic loads, aiming to present a structural design strategy for fracture-resistant soft materials. The elastomer-based soft network materials are proven to be crack-insensitive, low-hysteresis and anti-fatigue. The nonlinear finite element analysis (FEA) is employed to reveal the underlying mechanism of crack-insensitivity in elastomer-based soft network materials. Both the mechanical properties and deformed configurations of soft network materials with/without a precut crack are accurately predicted by the FEA method. The effect of microstructure geometry and network topology on the mechanical properties of soft network materials is systematically studied. Under various amplitudes of cyclic applied strain, the elastomerbased soft network materials can survive even after individual microstructures ruptured, and the fatigue fracture process slows down as the applied strain amplitude decreases. In contrast to the behavior observed in monotonic loads where fracture initiates at the microstructure located ahead of the crack tip, fatigue fracture initiation in soft network materials with a precut crack exhibits a random distribution.

Strain-stiffening elastomers fail from the edge

Elastomers Fail from the Edge

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Toughening Effect of Strain-Induced Crystallites in Natural Rubber.

Essential work of fracture of soft elastomers

Size-dependent fracture in elastomers: experiments and continuum modeling

Resolving stress state at crack tip to elucidate nature of elastomeric fracture

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Quantifying and mapping covalent bond scission during elastomer fracture

A MICROSCOPY INVESTIGATION OF RUBBER COMPOUND CRACK PRECURSORS AND TENSILE FRACTURE SURFACES

The Uniaxial Stress–Strain Relationship of Hyperelastic Material Models of Rubber Cracks in the Platens of Papermaking Machines Based on Nonlinear Strain and Stress Measurements with the Finite Element Method

Influence Of Cyclic Softening On The Energy Release Rate Of An Edge Crack Under Simple Tension

From Fibrils to Toughness: Multi-Scale Mechanics of Fibrillating Interfaces in Stretchable Electronics

Interfacial fatigue fracture of elastomer bilayers under cyclic large deformation

Structural Origin for the Strain Rate Dependence of Mechanical Response of Fluoroelastomer F2314

Surface instability of sheared soft tissues

Confinement-Induced Stiffening of Elastomer Thin Films

Toughening elastomers via microstructured thermoplastic fibers with sacrificial bonds and hidden lengths

Crack-Insensitive Fracture of Elastomer-Based Soft Network Materials under Monotonic and Cyclic Loads

A post mortem analysis of the strain-induced crystallization effects on fatigue of elastomers

Energy-Based Strength Theory for Soft Elastic Membranes