Abstract:Large deformations of soft materials are customarily associated with strong constitutive and geometrical nonlinearities that originate new modes of fracture. Some isotropic materials can develop strong fracture anisotropy, which manifests as modifications of the crack path. Sideways cracking occurs when the crack deviates to propagate in the loading direction, rather than perpendicular to it. This fracture mode results from higher resistance to propagation perpendicular to the principal stretch direction. It has been demonstrated that such fracture anisotropy is related to the microstructural stretch of the polymer chains, also known as strain crystallization mechanisms. However, the precise variation of the fracture behavior with the degree of crosslinking is not fully understood. Leveraging experiments and computational simulations, here we show that the tendency of a crack to propagate sideways in the two component Elastosil P7670 increases with the degree of crosslinking. We explore the mixing ratio for the synthesis of the elastomer that establishes the transition from forward to sideways fracturing. To assist the investigations, we construct a novel phase-field model for fracture where the critical energy release rate is directly related to the crosslinking degree. Our results demonstrate that fracture anisotropy can be programmed during the synthesis of the polymer. Then, we propose a roadmap with composite soft structures with low- and high-crosslinked phases that allow for control over fracture, arresting and/or directing the fracture. By extending our computational framework as a virtual testbed, we capture the fracture performance of the composite samples and enable predictions based on more intricate composite unit cells. Overall, our work offers promising avenues for enhancing the fracture toughness of soft polymers.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to program and control the crack behavior in soft materials, especially sideways cracking, by adjusting the cross - linking degree. Specifically, the author explored how changing the proportion of cross - linking agents during the synthesis process affects the mechanical properties and crack propagation patterns of elastomeric materials. It was found that as the cross - linking degree increases, the crack changes from the traditional forward propagation to sideways propagation, which is related to the microstructure changes of polymer chains. In addition, the paper also proposed a new phase - field model to simulate this crack behavior and demonstrated how to use this characteristic to design composite soft materials with specific crack paths and enhanced fracture toughness. ### Main research questions: 1. **The influence of cross - linking degree on crack behavior**: Study the crack propagation patterns of elastomeric materials under different cross - linking degrees, especially the occurrence mechanism of sideways cracks. 2. **Control of crack paths**: By adjusting the cross - linking degree, program and control the crack paths are achieved, thereby improving the fracture toughness of the materials. 3. **Design of composite materials**: Combine elastomers with low and high cross - linking degrees to design composite materials that can guide or prevent crack propagation under specific conditions. ### Research methods: - **Experimental part**: Through tensile tests, the mechanical properties and crack propagation patterns of elastomeric materials under different cross - linking degrees were tested. - **Computational simulation**: A new phase - field model was developed to simulate the crack propagation process and verify the experimental results. ### Key findings: - **The relationship between cross - linking degree and crack behavior**: As the cross - linking degree increases, the crack is more likely to spread sideways rather than forward along the loading direction. - **The mechanism of sideways cracks**: The occurrence of sideways cracks is related to the arrangement of polymer chains in the main tensile direction, resulting in an increase in the resistance to crack propagation perpendicular to the main tensile direction. - **Design of composite materials**: By combining elastomers with low and high cross - linking degrees, composite materials with specific crack paths and enhanced fracture toughness can be designed. ### Application prospects: - **Soft robots**: Improve the durability and reliability of soft robots. - **Bioengineering**: Design biomaterials with better mechanical properties. - **Microfluidics and flexible electronics**: Develop soft materials with higher fracture toughness for applications in these fields. In conclusion, through experiments and computational simulations, this paper systematically studied the influence of cross - linking degree on the crack behavior of elastomeric materials and proposed new methods to program and control crack paths, providing a theoretical and practical basis for designing high - performance soft materials.

Crosslinking degree variations enable programming and controlling soft fracture via sideways cracking

A Mesoscopic Network Mechanics Method to Reproduce the Large Deformation and Fracture Process of Cross-Linked Elastomers

A Nonlinear and Rate-Dependent Fracture Phase Field Framework for Multiple Cracking of Polymer

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Defect Size and Cross-Linker Properties Controlled Fracture of Biopolymer Networks

Tunable Mechanical Anisotropy, Crack Guiding, and Toughness Enhancement in Two‐Stage Reactive Polymer Networks

On modeling fracture of soft polymers

Crack Path Selection in Orientationally Ordered Composites

Designing the Cross-Linked Network to Tailor the Mechanical Fracture of Elastomeric Polymer Materials

Quantifying and mapping covalent bond scission during elastomer fracture

Molecular Dynamics Simulation of Fracture Mechanism in the Double Interpenetrated Cross-Linked Polymer

Micromechanically motivated finite-strain phase-field fracture model to investigate damage in crosslinked elastomers

Fracture metamaterials with on-demand crack paths enabled by bending

Reactive Molecular Dynamics of the Fracture Behavior in Geopolymer: Crack Angle Effect

Crack-Insensitive Fracture of Elastomer-Based Soft Network Materials under Monotonic and Cyclic Loads

Fracture of dual crosslink gels with permanent and transient crosslinks

Siloxane molecules: Nonlinear elastic behavior and fracture characteristics

Cavitation, Crazing and Bond Scission in Chemically Cross-Linked Polymer Nanocomposites.

Toughening Elastomers with Sacrificial Bonds and Watching Them Break

Elastomers Fail from the Edge

A Cyclic Plastic-Damage Multiphase Model for Evaluation of Multiple Cracking in Strain Hardening Cementitious Composites