Abstract:Transfer printing is a critical procedure for manufacturing stretchable electronics.During such a procedure,stamps are utilized to transfer micro devices from silicon wafers to stretchable polymeric substrates.In addition to conventional silicone rubber stamps,epoxy resin based shape memory stamps have been developed and the transfer yield is thus significantly promoted.However,elastic modulus of the epoxy stamps is too high at both glassy and rubbery states,which may break the brittle micro devices during the adhesion process under mechanical pressure.In this work,we synthesized a copolymer of butyl acrylate(BA) and polycaprolactone diacrylate(PCLDA) as a soft reversible dry adhesive enabling a shape memory capability based on crystalline transition of polycaprolactone(PCL) segments.For the sample containing 40 wt% BA and 60 wt% PCLDA,Young’s modulus was 8.3 and 0.9 MPa respectively below and above the thermal transition temperature,which was much lower than that of the epoxy adhesive.On the other hand,the soft material still provided nearly ideal shape memory fixity and recovery ratios.Subsequently,shape memory surface with cone-shaped microstructure was prepared,which enabled a heating induced strong-to-weak adhesion transition when the microstructure recovered from a pressed temporary morphology to the permanent cone-shaped morphology.Such a soft reversible dry adhesive may contribute to large-scale and automated transfer printing processing.

Imprinting the memory into paste and its visualization as crack patterns in drying process

Transition condition between memories of vibration and flow in the memory effect of paste

Effect of Interaction on the Formation of Memories in Paste

Memory effect of external oscillation on residual stress in a paste

Memory effect on the formation of drying cracks

Significant Impact of Thermo-Mechanical Conditions on Polymer Triple-Shape Memory Effect

A Soft Shape Memory Reversible Dry Adhesive

Solvent-driven temperature memory and multiple shape memory effects.

Unique Aspects of a Shape Memory Polymer As the Substrate for Surface Wrinkling.

Flow velocity-dependent transition of anisotropic crack patterns in CaCO$_3$ pastes

The Texture of Fresh Rice Noodles As Affected by the Physicochemical Properties and Starch Fine Structure of Aged Paddy

Modeling Shape-Memory Effects in Amorphous Polymers

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Memory of rotation in residual stress of paste

Effect of Rheology and Cooling on Paste Extrusion Using Texture Analysis

Unexpected Crystalline Memory Effect in Poly(l-Lactide)-based Block Copolymers

Triple-shape Memory Effect in 3D-Printed Polymers

Morphometric analysis of polygonal cracking patterns in desiccated starch slurries

Light‐Coded Digital Crystallinity Patterns Toward Bioinspired 4D Transformation of Shape‐Memory Polymers

Programmable, Pattern‐Memorizing Polymer Surface

Formation Mechanism of Radial and Circular Cracks Promoted by Delamination in Drying Silica Colloidal Deposits