Abstract:To explore the effects of freeze–thaw cycles on the mechanical properties and crack evolution of fissured sandstone, biaxial compression experiments were carried out on sandstone subjected to freeze–thaw cycles to characterize the changes in the physical and mechanical properties of fissured sandstone caused by freeze–thaw cycles. The crack evolution and crack change process on the surface of the fissured sandstone were recorded and analysed in detail via digital image technology (DIC). Numerical simulation was used to reveal the expansion process and damage mode of fine-scale cracks under the action of freeze–thaw cycles, and the simulation results were compared and analysed with the experimental data to verify the reliability of the numerical model. The results show that the mass loss, porosity, peak stress and elastic modulus all increase with increasing number of freeze–thaw cycles. With an increase in the number of freeze–thaw cycles, a substantial change in displacement occurs around the prefabricated cracks, and a stress concentration appears at the crack tip. As new cracks continue to sprout at the tips of the prefabricated cracks until the microcracks gradually penetrate into the main cracks, the displacement cloud becomes obviously discontinuous, and the contours of the displacement field in the crack fracture damage area simply intersect with the prefabricated cracks to form an obvious fracture. The damage patterns of the fractured sandstone after freeze–thaw cycles clearly differ, forming a symmetrical "L"-shaped damage pattern at zero freeze–thaw cycles, a symmetrical "V"-shaped damage pattern at 10 freeze–thaw cycles, and a "V"-shaped damage pattern at 20 freeze–thaw cycles. After 20 freeze–thaw cycles, a "V"-shaped destruction pattern and "L"-shaped destruction pattern are formed; after 30 freeze–thaw cycles, an "N"-shaped destruction pattern is formed. This shows that the failure mode of fractured sandstone gradually becomes more complicated with an increasing number of freeze–thaw cycles. The effects of freeze–thaw cycles on the direction and rate of crack propagation are revealed through a temperature–load coupled model, which provides an important reference for an in-depth understanding of the freeze–thaw failure mechanisms of fractured rock masses.

Flow velocity-dependent transition of anisotropic crack patterns in CaCO$_3$ pastes

Transition condition between memories of vibration and flow in the memory effect of paste

Sound Velocities Across Calcite Phase Transitions by Brillouin Scattering Spectroscopy

Manipulating crack formation in air-dried clay suspensions with tunable elasticity

Cracking to Curling Transition in Drying Colloidal Films

Flow-to-Friction Transition in Simulated Calcite Gouge: Experiments and Microphysical Modeling

Imprinting the memory into paste and its visualization as crack patterns in drying process

Memory effect on the formation of drying cracks

Decompaction-wave propagation in a vibrated fine powder bed

Formation Mechanism of Radial and Circular Cracks Promoted by Delamination in Drying Silica Colloidal Deposits

Pores and cracking in ceramics

Numerical study of drying process and columnar fracture process in granules-water mixtures

Morphological description of desiccation cracks in soils: insights from the perspective of anisotropy

Straight cracks in dynamic brittle fracture

Crack-closure behavior and stress-sensitive wave velocity of hard rock based on flat-joint model in particle-flow-code (PFC) modeling

Anomalous Thermal Effects on Fracture in Anhydrous Amorphous Calcium Carbonate

Crack Path Selection in Orientationally Ordered Composites

Morphologies of electric-field-driven cracks in dried dispersions of ellipsoids

Crack path instabilities in DCDC experiments in the low speed regime

Surface crack evolution patterns in freeze-thaw damage of fissured rock bodies

Universal Scaling of Polygonal Desiccation Crack Patterns