Abstract:Consideration of a core and mantle configuration for individual grains is a prominent method to capture the grain size-dependence in the constitutive models for polycrystal material. The mantle represents a region of the grain volume near the grain boundary where mechanical deformation is influenced by the grain boundaries, while the core represents the inner region of the grain volume. The grain size-dependence is then realized by assigning a set of values for the mechanical properties in the mantle that are different from those of the core region. However, these values for the mechanical properties of the mantle region are typically chosen arbitrarily, guided solely by the quality of the agreement between a model's predicted stress-strain behavior with that obtained experimentally. In the present study, a physics-based method to develop the grain size-dependent crystal plasticity constitutive model on the core and mantle configuration for polycrystal materials is presented. The method is based on the assumption that any resistance to dislocation nucleation and motion in a material manifests as an increase in yield strength and a decrease in strain-hardening modulus, and the mutual relationship between yield strength and strain-hardening is an inherent material property that determines the plasticity of that specific material. Accordingly, the same single crystal plasticity constitutive model that describes the behavior of the material under loading can be used to capture the increased resistance to dislocation nucleation and motion in the grain boundary influence region. The physics-based modeling is facilitated by introducing a shear flow strain distribution in the phenomenological formulation and a pile-up of dislocation density distribution in the dislocation based formulation, such that, the resulting variations in the yield strength and the strain-hardening modulus are identical to that produced by the increased resistance in the grain boundary influence region. Thus, the increase in strength and the decrease in the strain-hardening modulus, determined as spatially varying local material properties in the mantle, are mutually related through the grain size-independent inherent plastic properties specific to the material. A simplified model that considers the grain boundary effect averaged over the grain volume is also developed under this general framework. Implementation of this simplified model is demonstrated by considering the case of a power law flow rule and a hyperbolic-secant hardening rule for the phenomenological formulation, and Taylor strength relation for the dislocation based formulation. Finally, the grain size-dependent constitutive model is validated by comparing the predicted stress-strain behavior of polycrystal copper samples under uniaxial loading with experimental results.

Memory effect on the formation of drying cracks

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Memory effect of external oscillation on residual stress in a paste

Crack formation and self-closing in shrinkable, granular packings

Formation Mechanism of Radial and Circular Cracks Promoted by Delamination in Drying Silica Colloidal Deposits

Imprinting the memory into paste and its visualization as crack patterns in drying process

Cracking to Curling Transition in Drying Colloidal Films

Numerical study of drying process and columnar fracture process in granules-water mixtures

Crack Propagation In Viscoplastic Polymers: Heat Generation In Near-Tip Zone And Viscoplastic Cohesive Model

Crack densification in drying colloidal suspensions

Spiral Cracks in Drying Precipitates

A phase field model for deformation-induced amorphization

Dynamic Localized Shear Failure Influenced by Changing Rates in Brittle Solids Containing Initial Microcracks

Transition condition between memories of vibration and flow in the memory effect of paste

Thermomechanical Modeling of Microstructure Evolution Caused by Strain-Induced Crystallization

Grain size-dependent crystal plasticity constitutive model for polycrystal materials

Viscoplastic constitutive theory for brittle to ductile damage in polycrystalline materials under dynamic loading

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

Flow velocity-dependent transition of anisotropic crack patterns in CaCO$_3$ pastes

Thermal cracking: clarifying the effects of phases, voids and grains through characterisation and crystal plasticity modelling

Effects of Rate, Size and Prior Deformation in Microcrystal Plasticity