Abstract:The effect of shear stress on strain development and pore water accumulation resulting from principal stress rotation tests on intact Hangzhou soft clay using a Zhejiang University hollow cylinder apparatus (ZJU-HCA) is reported. Different types of tests were designated, including a shearing test along the fixed principal stress direction, a pure rotation test, and both clockwise and anti-clockwise rotation tests. The mean principal stress was kept constant in all tests. The intermediate principal stress coefficient (b) was set to 0.5. The pore pressure coefficient, deduced using a double yield surface theory, revealed that the volume yield surface function was not affected by the rotation of the principal stress axes. The pore water pressure in the fixed principal stress direction test and in the pure rotation test was shown to be mainly controlled by the shear stress level. As the results revealed that the anticlockwise rotation would have a higher effect on pore water pressure than clockwise rotation, the pore water pressure generated in the clockwise rotation test was relatively small. Because b was set to 0.5, the radial strain was very small. The development of the axial strain was symmetrical to the circumferential strain, which coincided with the horizontal symmetry of the axial stress and circumferential stress. Both the shear stress level and rotation angle have a pronounced effect on strain development. When soil subjected to pure principal stress rotation under the conditions of high stress levels, large strains would be expected and any underestimation will lead to insecurity. If the specimen experienced a preceding rotation, its influence on the strain development in the subsequent rotation was significant. The variation of octahedral shear stiffness G(oct) with rotation angle also demonstrated the deterioration of the preceding rotation in the following rotation.

Memory of rotation in residual stress of paste

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Memory effect of external oscillation on residual stress in a paste

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

Impact of Shear Stress on Strain and Pore Water Pressure Behavior of Intact Soft Clay under Principal Stress Rotation

A rotational plastic potential model and non-associated plastic flow rule

Transition condition between memories of vibration and flow in the memory effect of paste

Internal Stress in a Model Elasto-Plastic Fluid

ELASTO-PLASTIC DEFORMATION BEHAVIOR OF INTACT CLAY SUBJECTED TO PRINCIPAL STRESS ROTATION

Rotation of Stresses in French Wheel Tracking Test

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Combined experimental/theoretical approach to residual stresses within multiplicative elasto-plasticity

Imprinting the memory into paste and its visualization as crack patterns in drying process

Flow Deformation of Sands Subjected to Principal Stress Rotation

Morphology of residually-stressed tubular tissues: Beyond the elastic multiplicative decomposition

Evolution of residual stress when turning a fillet radius in stainless steel

Analysis of residual stress field in strain-hardened hollow circular discs subjected to autofrettage by radial temperature difference

Thermodynamic modeling of accumulated deformation of saturated clays under pure principal stress rotation

Deformation of Granular Material under Continuous Rotation of Stress Principal Axes

Memory of rheological stress in polymers using Fractional Calculus