Abstract:Bounding surface plasticity has been widely used for capturing the stress–strain behaviour of geomaterials. However, it may require multiple sets of model parameters for constitutive modelling of sands with a wide range of initial states, because of the distinct critical state characteristics under low and high densities or pressures in the <span class="mathjax-tex">\(e-\ln {p}'\)</span> plane. In this study, an enhanced bounding surface plasticity approach for sand with a wide range of initial material states is developed. A fractional plastic flow rule and a modified critical state line are suggested, which ensures that without using any predefined state indices, the developed model can consider the state-dependent dilatancy and hardening behaviours of sand subjected to low and high pressures/densities. The approach is validated by simulating the well-documented test results of Toyoura sand and Sacramento River sand. For comparison, the original state-dependent dilatancy approach in Li and Dafalias (Géotechnique 50(4):449–460, 2000. <a href="https://doi.org/10.1680/geot.2000.50.4.449">https://doi.org/10.1680/geot.2000.50.4.449</a>) is also adopted and implemented. It is found that the two approaches can reasonably capture the typical stress–strain behaviour, e.g. hardening/contraction, softening/dilation, liquefaction, quasi-steady state flow, and non-flow, of sands with different initial material states, by using a single set of model parameters. However, compared to the current work, Li and Dafalias (2000) model relied on a predefined state parameter, for capturing the state-dependent behaviour of sand under a wide range of initial states

A rotational plastic potential model and non-associated plastic flow rule

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Improved Computational Method Based Upon Slip-line Field Theory For Passive Plies For Practical Use

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Strain Gradient Plasticity Solutions of Plastic Region Radius for a Borehole Problem

Calculation of Vehicular Load-Induced Plastic Deformation of Soft Subsoil

Incremental behavior of granular soils: a strain response envelope perspective

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

ELASTO-PLASTIC DEFORMATION BEHAVIOR OF INTACT CLAY SUBJECTED TO PRINCIPAL STRESS ROTATION

Generalized Plastic Ordinary State-Based Peridynamic Model with Shear Deformation of Geomaterials

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

Effect Of Non-Coaxiality On Dilatancy Of Sand Involving Principal Stress Axes Rotation

Elasto-plastic Model of Soil with a Function of Plastic Work As the Hardening Function

A Two-Dimensional Ordinary State-Based Peridynamic Model for Plastic Deformation Based on Drucker-Prager Criteria with Non-Associated Flow Rule

Application of Multiple Dissipation Potentials Functions Rate-Independent Plasticity Model with Applications to Clay

Energy-based plastic potential and yield functions for rockfills

Modified Anisotropic Generalized Plasticity Model for Rockfills Based on Spatial Mobilized Plane

Formulation and implementation of an isotropic plasticity model enriched with shift stress and fractional flow rule

Elasto-plastic solutions for expanding cavities in strain-hardening and/or softening soils

Bounding surface plasticity for sand using fractional flow rule and modified critical state line