Abstract:This article presents an adaptive zoom-capacitance-to-digital converter (CDC)-based CMOS humidity sensor. The humidity sensor is realized by means of two differential capacitors whose dielectrics are sensitive to humidity. The sensing capacitors are interfaced with a zoom CDC, which consists of a successive-approximation- register (SAR) analog-to-digital converter (ADC) and a 3rd-order delta-sigma modulator (Delta Sigma M). The SAR ADC eliminates the influence of the baseline capacitance to reduce the input range of the Delta Sigma M. To improve the energy efficiency of the CDC across the full input range, a power-aware floating inverter amplifier (FIA) array is proposed, which is configured based on the conversion results of the SAR logic. In addition, an adaptive range-shift (ARS) zoom CDC is proposed to: 1) resist off-chip parasitics and interference and 2) allow low redundancy and a more energy-efficient FIA-based comparator, thus reducing power consumption. The proposed CMOS humidity sensor is implemented in a 0.11-mu m CMOS process. Measurement results show a capacitance resolution of 17.9 aF and an effective number of bits (ENOB) of 14.0 within a conversion time of 1.01 ms. The proposed humidity sensor consumes 1.5 mu W of power and exhibits a 0.0094 % relative humidity (RH) resolution and a +/- 1.5 %RH peak-to-peak accuracy (3 sigma error of 5.5 %RH) among 12 chips from 20 to 85 % RH, and it achieves a figure of merit (FoM) of 0.135 pJ.%RH2, which is more than six times better than the state of the art.

Improved Performance of FET-Type Humidity Sensor With Low-Power Embedded Micro-Heater

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

Reliability of FET-type gas sensor with asymmetric air-gap micro-heater structure considering thermoelectric effect

Capacitive CMOS Humidity Sensor with Novel Fringe Electrodes and Polyimide-Pillars for Performance Enhancement

High-Performance Porous MIM-type Capacitive Humidity Sensor Realized Via Inductive Coupled Plasma and Reactive-Ion Etching

Branched Polyethylenimine-Based Field Effect Transistor for Low Humidity Detection at Room Temperature

A Highly Sensitive FET-Type Humidity Sensor with Inkjet-Printed Pt-In2O3 Nanoparticles at Room Temperature

A 1770- $\mu$ M 2 Leakage-Based Digital Temperature Sensor with Supply Sensitivity Suppression in 55-Nm CMOS

Monolithic Integrated Cmos-Mems Mos Type Gas Sensor And Novel Heater For Sensitivity And Power Consumption Enhancement

A nanowire WO3 humidity sensor integrated with micro-heater and inverting amplifier circuit on chip manufactured using CMOS-MEMS technique

A Micro Capacitive Humidity Sensor Based on Al-Mo Electrodes and Polyimide Film

Micro-Heater Embedded ISFET pH Sensor with High-k Gate Dielectrics for Enhanced Sensitivity

A CMOS Capacitive Vertical-Parallel-plate-array Humidity Sensor with RF-aerogel Fill-in for Sensitivity and Response Time Improvement

A High-Performance Humidity Sensor Based on In-Pcb Interdigitated Electrodes

Monolithic Integration Of Gas/Humidity/Temperature Sensors With Thermal Coupling Effect Reduction

High-Performance Temperature Sensor by Employing Screen Printing Technology

Energy-Efficient CMOS Humidity Sensors Using Adaptive Range-Shift Zoom CDC and Power-Aware Floating Inverter Amplifier Array

Self-Powered, Rapid-Response, and Highly Flexible Humidity Sensors Based on Moisture-Dependent Voltage Generation.

5.1 A 1.5μW 0.135pJ·%RH<sup>2</sup> CMOS Humidity Sensor Using Adaptive Range-Shift Zoom CDC and Power-Aware Floating Inverter Amplifier Array

Ferroelectric Polarization and Oxygen Vacancy Synergistically Induced an Ultrasensitive and Fast Humidity Sensor for Multifunctional Applications