Abstract:A new method that utilizes theories of thermally activated deformation and repeated transient stress-relaxation tests has been proposed and validated in this study for the characterization and modeling of the stress-relaxation aging (SRA) behavior of aluminum alloys and its dependence on stress and temperature. Using the new method, key deformation-related variables, i.e., stress components, activation volume, and activation energy, of the aerospace grade heat-treatable aluminum alloy AA7B04 have been obtained as a function of aging temperature (388 K, 413 K and 438 K), stress (both elastic and plastic), and SRA time (up to 4 hours). It has been found that the apparent activation energy Qa of the material remains constant in the elastic region but decreases with the increase in strain in the plastic region, and also decreases with the increase in temperature for all initial loading stresses. These characteristics contribute to a much higher degree of stress relaxation in the plastic region and at higher temperatures than in the elastic region and/or at lower temperatures. The obtained changing activation volume V and Qa indicate that the deformation rate is controlled by forest dislocation interactions in the elastic region (V decreases from over 200b3 to less than 100b3), and by a cross-slip mechanism at high stress levels in the plastic region (V decreases to a few tens of b3). Based on these theories and results, a novel and simple constitutive model has been proposed, with which the stress-relaxation behavior of AA7B04 at different aging temperatures (388 K to 448 K), preloaded from elastic to plastic regions for up to 16 hours has been successfully predicted. The proposed model eliminates the limitations of conventional SRA models which mainly deals with elastic loading and isothermal conditions, and provides a foundation to effectively predict the springback after advanced non-isothermal SRA forming of aluminum alloy structures in the aerospace industry.

Relaxation mechanisms of near – α titanium alloy during stress relaxation with synchronous aging

Accelerated stress relaxation with simultaneously enhanced strength of titanium alloy by phase transformation and stress-induced twinning

Study on the Stress Relaxation with Synchronous Ageing of Near Α Titanium Alloy

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Research on stress relaxation behavior of TA15 titanium alloy

Microstructure refinement and enhanced wear-resistance modulated by stress relaxation processing in a metastable β titanium alloy

Thermal relaxation of compressive residual stresses in surface gradient nanostructure of TC11 titanium alloy

A Unified Constitutive Model of Stress Relaxation of Ti-6Al-4V Alloy with Different Temperatures from Elastic to Plastic Loading

Experimental and Modeling Studies on the Stress Relaxation Behaviour of Ti-6Al-4V Alloy

Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys

Influence of stress-induced α’’ phase transformation on mechanical properties in metastable β type Ti-5Al-2.5Cr-5Mo-1Sn alloy

A New Method to Characterize and Model Stress-Relaxation Aging Behavior of Aluminum Alloys Under Age Forming Conditions

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Stress relaxation mechanism and life evaluation of titanium alloy springs under long-term thermo-mechanical coupling conditions

Revealing the Effect of α' Decomposition on Microstructure Evolution and Mechanical Properties in Ti80 Alloy

Deformation mechanisms in the α phase of the Ti-6Al-2Sn-4Zr-2Mo titanium alloy: in situ experiments and simulations

Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression

Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses

Preparation of Multiscale α Phase by Heat Treatments and Its Effect on Tensile Properties in Metastable β Titanium Alloy Sheet

Simultaneously enhancing strength and ductility of Ti-6Al-4V alloy with the hierarchical structure via a novel thermal annealing treatment

Correlation between Precipitation and Recrystallisation during Stress Relaxation in Titanium Microalloyed Steel