Abstract:A long-standing conflict concerning metastable β-titanium (Ti) alloys is that high strength can be achieved through precipitation strengthening of α-phase while plasticity is largely compromised and even lost completely. Such strength-plasticity trade-off severely limits their structural applications. Here, an attempt to address the issue has been made in Ti–6Cr–5Mo–5V–4Al (Ti6554) high-strength metastable β-Ti alloy. Heterogeneous β-structure is architected by partial static recrystallization (SRX) through properly manipulating solution treatment in the hot-rolled bars. The resulting microstructure is composed of the recrystallized ‘new’ equiaxed β-grains (βe) and the remnant elongated β-fibers (βf). This β-morphology dramatically affects the subsequent αs-precipitation behavior during the aging process. αs-precipitation is rather uniform throughout βf-grains because the pre-existing dislocations left by hot rolling provide copious nucleation sites. However, αGB-films are preferentially formed along βe-grain boundaries, which leads to a boundary-affect zone (BAZ) and thereby renders αs-precipitation in a size gradient from β-grain boundaries to grain interiors. As a result, an ultra-high strength of ∼1700 MPa is achieved whilst the ductility can be up to be 5% in the β-hetero aged samples, which is superior to the β-homo aged siblings that have the same strength level but fully succumb to macroscopic brittleness. The enhanced plasticity in the β-hetero aged samples originates from much better deformation compatibility conferred by the aged βf-grains. However, the soft feature of BAZ around βe-grain boundaries in the β-homo aged samples causes strain localization, which eventually induces intergranular brittle fracture. These findings provide an effective strategy for enhancing plasticity of high-strength metastable β-Ti alloys by structural design, where homogeneous αs-precipitates can be easily constructed by combining conventional thermomechanical processing and heat treatment.

Microstructure refinement and enhanced wear-resistance modulated by stress relaxation processing in a metastable β titanium alloy

Dependence of fretting wear on the microstructure characteristics and impact on the subsurface stability of a metastable β titanium alloy

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Dynamic mechanical behavior, microstructure evolution, and restoration mechanism of a β‐Ti alloy during hot compression deformation

Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression

The interplay relationship between phase transformation and deformation behavior during hot compression in a metastable β titanium alloy

Effectiveness of hot deformation and subsequent annealing for β grain refinement of Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy

Enhanced thermo-mechanical processing through stress-induced martensitic transformation and its effect on grain refinement in metastable β titanium alloys

Homogeneous α-precipitation and enhanced plasticity in Ti–6Cr–5Mo–5V–4Al high-strength metastable titanium alloy with heterogenous β-structure

A new microstructural refinement mechanism of ultra-large β grains in near-β titanium alloys during primary hot-working

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Microstructural evolution and oxidation in α/β titanium alloy under fretting fatigue loading

Influence of stress-induced α’’ phase transformation on mechanical properties in metastable β type Ti-5Al-2.5Cr-5Mo-1Sn alloy

The Effect of Precursory Α and Ω Phase on Microstructure Evolution and Tensile Properties of Metastable Β Titanium Alloy

Characterization of hot deformation and microstructure evolution of a new metastable β titanium alloy

Relaxation mechanisms of near – α titanium alloy during stress relaxation with synchronous aging

Achieving high strength-ductility synergy in a hierarchical structured metastable β-titanium alloy using through-transus forging

Exploration of Nano-scale Structural Instabilities in Metastable Β Titanium Alloys Using Advanced Electron Microscopy

Hot deformation behavior and microstructure evolution of TC11 dual-phase titanium alloy

Preparation of Multiscale α Phase by Heat Treatments and Its Effect on Tensile Properties in Metastable β Titanium Alloy Sheet

Recent progress in the simulation of microstructure evolution in titanium alloys