Abstract:The heat partition coefficient between two finite thickness contact discs during long-time sliding is studied with a coupled finite element method. Results show that the heat partition coefficient varies from its initial value to another steady state value rapidly instead of being a constant all the time. An analytical solution of the temperature field under invariant heat flux input is deduced, which tells that there exists a unique critical thickness ratio between the contact discs that keeps the heat partition coefficient a constant. An equivalent method for single-material contact bodies is proposed that is capable of calculating the steady state heat partition coefficient for any thickness ratio. It reveals that the steady state heat partition coefficient only has relationship with the mass density and the heat capacity of the materials and the thickness ratio. Based on this method, a two-step material equivalent method is further proposed for the contact discs that have friction linings on them. The solution shows that the steady state heat partition coefficient in this situation is also only determined by the material properties and the layer thicknesses. A test bench of multi-disc clutch is set up and a series of sliding experiments are conducted to validate the proposed equivalent methods and solutions of steady state heat partition coefficient. The measured experimental temperature variations show that the temperature level of the separator disc in the clutch is overestimated with the constant heat partition coefficient of semi-infinite model, while it is close to those calculated results with steady state heat partition coefficient. Therefore, the temperature fields of the contact discs during long-time sliding with constant speed can be figured out efficiently using the steady state heat partition coefficient with only small error, and these equivalent methods benefit the multi-disc clutch design and temperature estimation in practical applications.

A temperature field model based on energy flow analysis of wet clutch sliding interface

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Temperature Field Characteristics of Limited Slip Clutch under Various Condition Parameters

Prediction of the Temperature on AMT Clutch-disc Surface Based on LS-SVM

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Finite Element Analysis for Temperature Field of Clutches Based on B-spline Wavelet

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Transient temperature characteristics of friction clutch disc considering thermal contact conductance under sliding conditions

Analytical Model and Material Equivalent Methods for Steady State Heat Partition Coefficient Between Two Contact Discs in Multi-Disc Clutch

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Design and characteristic of lubricating oil chamber of hydro-viscous drive clutch

Study on dynamic characteristics variation mechanism of wet-clutches during the filling phase considering temperature and rotational speed of the oil

Thermal Behavior of Friction Discs in Dry Clutches Based on a Non-Uniform Pressure Model

Influence upon temperature field distribution with straight grooves parameters of clutch friction disk

Calculation and analysis of wet clutch sliding torque based on fluid-solid coupling dynamic behavior

Temperature Analysis of Wet Clutch' Friction Pair Considering Axial Pressure Attenuation Effect

A Simulation Study of the Temperature Field of A DCT Under the Frequent Shifting Condition

Control-oriented modeling of wet clutch friction considering thermal dynamics