Abstract:Innovating new approaches and effective methods to improve the efficiency of mechanical systems in terms of energy losses and environmental effects serve as an attractive domain for researchers and industries. Wet clutches are widely used in power transmission systems in automotive and other tribological mechanisms. The wet clutch has two functional modes; under the engaged state, in which two disks come into contact to each other, and under disengagement the plates are located at a very short distance from each other, and oil flows between them. In disengaged state, the differential speed of driving and driven units causes oil shearing within the clearance which leads to transmission of certain amount of drag torque from the driving to the output shaft. This transferred drag torque is distinguished as power loss in form of heat. The governing physical relation based on continuity equation and Navier–Stokes equations reveals that in a certain rotational velocity, the pressure gradient at the outer radius of the clutch becomes null, and, in this circumstance, aeration occurs that is known as critical rotation speed. Experimental findings provide evidence that geometry manipulation and considering grooves over the frictional disk, reduces the critical rotational speed. But there is a shortage of physical analytical relations to predict the pressure gradient in grooved wet clutches. Therefore, this article is aimed to introduce analytical model to evaluate grooved wet clutches performance in terms of drag torque and critical rotational speed under single-phase flow condition.

Calculation and analysis of wet clutch sliding torque based on fluid-solid coupling dynamic behavior

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Simulation Analysis for Lubrication State of the Thrust Washer Within Straight Planetary Gear Set

A temperature field model based on energy flow analysis of wet clutch sliding interface

Sliding State Analysis of Fractal Rough Interface Based on the Finite Element Method

Modeling of the Drag Torque of the Disengaged Grooved Wet Clutches with Waviness

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

Control-oriented modeling of wet clutch friction considering thermal dynamics

Temperature Analysis of Wet Clutch' Friction Pair Considering Axial Pressure Attenuation Effect

Nonlinear Dynamic Characteristics of Rub-Impact Process at High Circumferential Velocities in No-Load Multiplate Wet Clutch

Study on dynamic characteristics variation mechanism of wet-clutches during the filling phase considering temperature and rotational speed of the oil

Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition

Simulation and Experimental Study of Engagement Process with Groove Consideration

Investigation of engagement characteristics of a multi-disc wet friction clutch

Analysis and Revision of Torque Formula for Hydro-viscous Clutch

A computer model for sliding friction in lubricated-point contacts

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method