Abstract:Electronic conduction through proton-conducting electrolytes significantly impairs the efficiency of protonic ceramic cells (PCCs). In this study, we explore the electron and ion mixed transport properties of four common protonic ceramics, BaZr 0.8 Y 0.2 O 3-δ (BZY82), BaZr 0.7 Ce 0.2 Y 0.1 O 3-δ (BZCY721), BaZr 04 Ce 0.4 Y 0.1 Yb 0.1 O 3-δ (BZCYYb4411), and BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ (BZCYYb1711). It marks the first instance of investigating these properties under operation-specific scenarios: fuel side of electrolysis cell, air side of electrolysis cell, fuel side of fuel cell, and air side of the fuel cell. BZCYYb1711 exhibits the highest ionic conductivity, but two to three times higher electronic leakage when exposed to oxygen-containing environments than the others. BZY82 exhibits approximately two times higher electronic leakage in a hydrogen-containing environment. BZCY721 demonstrates excellent ion transport numbers (∼0.95) across these four operating conditions. BZCYYb4411 behaves quite similarly to BZCY721. The most challenging operating environment for all candidates is the air side of fuel cell mode. This mode leads to a high initial electronic leakage, followed by a significant increase with polarization. The probable cause for this behavior is a H 2 -free, polarization-induced reduction that leads to the formation of VO• . The electron small polaron associated with VO• is released by the electrical field due to the Poole-Frenkel effect. ZnO and NiO sintering aids are found to be detrimental to the ionic conductivity of the electrolytes. In particular, NiO substantially lowers the ion transport number. The correlation of the operation-specific electronic leakage to full cells is discussed. It is suggested that a rational PCC design should synergistically couple BZCYYb1711 at fuel side with BZCY4411 at air side to deliver a well-balanced performance and faradaic efficiency simultaneously, and the high temperature sintering process with a NiO fuel electrode should be shortened or replaced by ultra-fast sintering techniques or using a fuel electrode scaffold-infiltration fabrication strategy.

Boundaries of DC operation of a tubular proton ceramic electrochemical reactor with BZCY electrolyte and Ni-BZCY cermet electrodes

Impedance of a tubular electrochemical cell with BZCY electrolyte and Ni-BZCY cermet electrodes for proton ceramic membrane reactors

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Unraveling the conundrum of electronic leakage in protonic ceramic cells: Operation-specific insights and rational design strategies

Scalable Fabrication and Resistance Deconvolution of Ni/BCZY Fuel Electrode-Supported Protonic Ceramic Cells

Large-area protonic ceramic cells for hydrogen purification

Preparation, characterization and application of BaZr0.1Ce0.7Y0.2O3-δ for a high-performance and stable proton ceramic electrochemical cell

Designing High Interfacial Conduction Beyond Bulk Via Engineering the Semiconductor–Ionic Heterostructure CeO2−δ/BaZr0.8Y0.2O3 for Superior Proton Conductive Fuel Cell and Water Electrolysis Applications

High-temperature Water Oxidation Activity of a Perovskite-Based Nanocomposite Towards Application As Air Electrode in Reversible Protonic Ceramic Cells

Fabrication of Integrated BZY Electrolyte Matrices for Protonic Ceramic Membrane Fuel Cells by Tape-Casting and Solid-State Reactive Sintering

Electrolyte-electrode Interface: A Key Factor for Advanced Protonic Ceramic Electrochemical Cells

Tuning barium release from sacrificial powders to optimize sintering and enhance the performance of reversible large-scale tubular protonic ceramic electrochemical cells

High Performance Dense Proton Ceramic Electrolyte Material

Hydrogen Oxidation at the Pt–BaZr0.1Ce0.7Y0.1Yb0.1O3−δ (bzcyyb) Interface

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Reactive Magnetron Sputtering for Y-Doped Barium Zirconate Electrolyte Deposition in a Complete Protonic Ceramic Fuel Cell

Porous/dense Bilayer BaZr0.8Y0.2O3-δ Electrolyte Matrix Fabricated by Tape Casting Combined with Solid-State Reactive Sintering for Protonic Ceramic Fuel Cells

Hydrogen oxidation at the Pt – BaZr 0 . 1 Ce 0 . 7 Y 0 . 1 Yb 0 . 1 O 3 d ( BZCYYb ) interface

Highly conductive grain boundaries in cold-sintered barium zirconate-based proton conductors

Design of efficient and durable symmetrical protonic ceramic fuel cells at intermediate temperatures via B-site doping of Ni in BaCe0.56Zr0.2Ni0.04Y0.2O3–δ

Scalable Fabrication Process for New Structure BaZr0.8Y0.2O3-δ-based Protonic Ceramic Fuel Cells