Abstract:We have investigated the superconducting properties of nanocomposite pellets made from Bi-2223 and Co2C powders. There is loss of superconducting fraction in the nanocomposites, but the retained superconducting fraction exhibits robust bulk superconducting properties, having Tc ~ 109 K which was found to be comparable to that of the pure Bi-2223 pellet. We found that the composites net magnetization response is a superposition of ferromagnetic and superconducting fractions contributions. We also found the surviving superconducting fraction exhibits a robust Meissner response. In the nanocomposite the irreversibility field of the superconducting fraction at 77 K is found to increase by almost three times compared to the pristine material, thereby showing strong vortex pinning features. We also find a broadened magnetic field regime over which we observe a single vortex pinning regime sustained in the nanocomposite. The critical current density, Jc, of the nanocomposite was found to be approximately five times higher than that of the pristine Bi-2223 pellet at low T. In fact, the enhancement in Jc is most significant in the high T regime, where at temperatures close to Tc in the nanocomposite we see almost two orders of magnitude increase of Jc compared to the pristine Bi-2223 pellet. The larger sized agglomeration of magnetic nanoparticles of Co2C leads to loss of superconductivity in the nanocomposite. However, there are also unagglomerated Co2C nanoparticles distributed uniformly throughout the nanocomposite which acts as efficient pinning centres allowing for collective vortex pinning centres to be retained, even upto temperatures near Tc, and these nanoparticles also do not compromise the bulk Tc of the superconducting fraction. Our study shows that these nanocomposites exhibit enhanced Jc especially in the high T regime are potentially useful for high current applications.

Improved Irreversibility Behaviour and Critical Current Density in MgB2-Diamond Nanocomposites

Amorphous B coated Mg nanopowder induces low angle grain boundaries and enhances J c of MgB 2 wire

Effect of Nano-SiC and Nano-Si Doping on Critical Current Density of MgB 2

Improved Current Densities in MgB2 By Liquid-Assisted Sintering

Nanoscale-SiC doping for enhancing Jc and Hc2 in the Superconducting MgB2

Improved flux pinning behaviour in bulk MgB<sub>2</sub> achieved by nano-SiO<sub>2</sub> addition

The doping effect of multiwall carbon nanotube on MgB2/Fe superconductor wire

Significant Enhancement of Flux Pinning in Mgb2 Superconductor Through Nano-Si Addition

Significant Improvement of Jc in MgB2 Bulk Superconductor Using Ball-Milled High-Purity Crystalline Boron

Improved superconducting properties of MgB2

The Influence of Synthesis Parameters on Microstructures and Superconducting Properties of MgB2 Bulks

Enhancement of the upper critical field in disordered nanocrystalline MgB2 bulks

Review of superconducting properties of MgB2

High transport critical currents in dense, metal-clad superconductor wires of MgB2

Effect of grain refinement on enhancing critical current density and upper critical field in undoped MgB2 ex-situ tapes

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

Supercurrents in magnesium diboride/metal composite wire

Irradiation induced modification of the superconducting properties of heavily boron doped diamond

Impact of Co2C Nanoparticles on Enhancing the Critical Current Density of Bi-2223 Superconductor

Improved Superconducting Properties in Bulk MgB2 Prepared by High Energy Milling of Mg and B Powder

High Critical Current Density of a MgB 2 Bulk Superconductor High-pressure Synthesized Directly from the Elements