Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

Modeling of Ductile Damage and Fracture Behavior Based on Different Micromechanisms

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage

A ductile damage criterion at various stress triaxialities

Macroscopic damage laws based on analysis of microscopic unit cells

Numerical Analysis of Experiments on Damage and Fracture Behavior of Differently Preloaded Aluminum Alloy Specimens

Continuum damage mechanics modelling incorporating stress triaxiality effect on ductile damage initiation

Stress state dependence of ductile damage and fracture behavior: Experiments and numerical simulations

An anisotropic ductile damage model based on irreversible thermodynamics

Ductile damage evolution under triaxial state of stress: theory and experiments

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

Hierarchical Modeling of Damage and Fracture in a Structurally Inhomogeneous Materials Subjected to Deformation

Damage and fracture initiation under shear and compression stress states in the aluminum alloy EN AW6082-T6

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Micromechanical Analysis of Microcrack-Induced Residual Strains in Quasi-Brittle Solids

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

A damage model for ductile metals

Modelling of dynamic damage and failure in aluminium alloys

A large strain gradient-enhanced ductile damage model: finite element formulation, experiment and parameter identification