Abstract:The mechanisms of oxide metallurgy include inducing the formation of intragranular acicular ferrite (IAF) using micron-sized inclusions and restricting the growth of prior austenite grains (PAGs) by nanosized particles during welding. The chaotically oriented IAF and refined PAGs inhibit crack initiation and propagation in the steel, resulting in high impact toughness. This work summarizes the combined effect of deoxidizers and alloying elements, with the aim to provide a new perspective for the research and practice related to improving the impact toughness of the heat affected zone (HAZ) during the high heat input welding. Ti complex deoxidation with other strong deoxidants, such as Mg, Ca, Zr, and rare earth metals (REMs), can improve the toughness of the heat-affected zone (HAZ) by refining PAGs or increasing IAF contents. However, it is difficult to identify the specific phase responsible for IAF nucleation because effective inclusions formed by complex deoxidation are usually multiphase. Increasing alloying elements, such as C, Si, Al, Nb, or Cr, contents can impair HAZ toughness. A high C content typically increases the number of coarse carbides and decreases the potency of IAF formation. Si, Cr, or Al addition leads to the formation of undesirable microstructures. Nb reduces the high-temperature stability of the precipitates. Mo, V, and B can enhance HAZ toughness. Mo-containing precipitates present good thermal stability. VN or V(C,N) is effective in promoting IAF nucleation due to its good coherent crystallographic relationship with ferrite. The formation of the B-depleted zone around the inclusion promotes IAF formation. The interactions between alloying elements are complex, and the effect of adding different alloying elements remains to be evaluated. In the future, the interactions between various alloying elements and their effects on oxide metallurgy, as well as the calculation of the nucleation effects of effective inclusions using first principles calculations will become the focus of oxide metallurgy.

Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements

Effect of Zr-Ti Combined Deoxidation on Toughness of Coarse-Grained Heat-Affected Zone with High Heat Input Welding of Low Carbon High Strength Steels

Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ

Effect of Zr-Ti combined deoxidation on microstructure and toughness in coarse-grained region of heat-affected zone of high strength low alloy steels

Improvement of HAZ Toughness of Steel Plate for High Heat Input Welding by Inclusion Control with Mg Deoxidation

Effect of Molybdenum on the Impact Toughness of Heat-Affected Zone in High-Strength Low-Alloy Steel

Effects of Al Addition on the Microstructure of Fe-Mn-Si Ultra-Fine Grain Steel Welded Heat Affected Zone

Progress on effects of alloying elements on bainite formation and strength and toughness of high strength steel weld metal

Oxide Metallurgy Technology in High Strength Steel: A Review

Improvement of impact toughness by microstructure refinement of simulated CGHAZ through enhancing welding heat input of low carbon Mo-V-Ti-N-B steel

Tailoring the Microstructure of Coarse-Grained HAZ in Steel for Large Heat Input Welding: Effect of Ti–Mg–Ce–V Inclusion/Precipitation Particles

N-induced Microstructure Refinement and Toughness Improvement in the Coarse Grain Heat-Affected Zone of a Low Carbon Mo–V–Ti–B Steel Subjected to a High Heat Input Welding Thermal Cycle

Effect of inclusions on toughness and microstructures in simulated coarse-grain heat-affected zones of Al/Ti deoxidised and Nb/V microalloyed steels

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Toughness Improvement By Zr Addition In The Simulated Coarse-Grained Heat-Affected Zone Of High-Strength Low-Alloy Steels

Mechanism of high strength and high toughness of HSLA weld deposited metal

Mechanism of BN-Promoting Acicular Ferrite Nucleation to Improve Heat-Affected Zone Toughness of V-N-Ti Microalloyed Offshore Steel

Strengthening Mechanisms of Combined Alloying with Carbon and Titanium on Laser Beam Welded Joints of Molybdenum Alloy

In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation

Effect of Zr-Ti Combined Deoxidation on the Microstructure and Mechanical Properties of High-Strength Low-Alloy Steels

Effects of Ti, B and O on Weld Structure and Impact Toughness of High Heat Input Flux Cored Wire