Abstract:Due to the low content of alloying elements and the lack of effective nucleation sites, the fusion zone (FZ) of tungsten inert gas (TIG) welded AZ31 alloy typically exhibits undesirable coarse columnar grains, which can result in solidification defects and reduced mechanical properties. In this work, a novel welding wire containing MgO particles has been developed to promote columnar-to-equiaxed transition (CET) in the FZ of TIG-welded AZ31 alloy. The results show the achievement of a fully equiaxed grain structure in the FZ, with a significant 71.9% reduction in grain size to 41 mu m from the original coarse columnar dendrites. Furthermore, the combination of using MgO-containing welding wire and pulse current can further refine the grain size to 25.6 mu m. Microstructural analyses reveal the homogeneous distribution of MgO particles in the FZ. The application of pulse current results in an increase in the number density of MgO (1-2 mu m) from 5.16 x 104 m-3 to 6.18 x 104 m-3 . The good crystallographic matching relationship between MgO and alpha-Mg matrix, characterized by the orientation relationship of [112 0 ] alpha-Mg //[01 1 ] MgO and (0 0 02 ) alpha-Mg //( 111) MgO , indicates that the MgO particles can act as effective nucleation sites for alpha Mg to reduce nucleation undercooling. According to the Hunt criteria, the critical temperature gradient for CET is greatly enhanced due to the significantly increased number density of MgO nucleation sites. In addition, the correlation with the thermal simulation results reveals a transition in the solidification conditions within the welding pool from the columnar grain zone to the equiaxed grain zone in the CET map, leading to the realization of CET. The exceptional grain refinement has contributed to a simultaneous improvement in the strength and plasticity of welded joints. This study presents a novel strategy for controlling equiaxed microstructure and optimizing mechanical properties in fusion welding or wire and arc additive manufacturing of Mg alloy components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Achieving columnar-to-equiaxed transition to reduce hot cracking susceptibility in TIG-welded AZ31 alloy through MgO modification

Exceptional Grain Refinement Induced by Dispersed MgO Particles in TIG-welded AZ31 Alloy

Joining Of Aluminum And Magnesium Via Pre-Roll-Assisted A-Tig Welding With Zn Interlayer

Study of Microstructure and Properties of AZ91 Magnesium Alloy Welded Joint with Magnetic Field and TiO2 Activated Flux

Inhibiting weld cracking in high-strength aluminium alloys

Controlling the Columnar-to-equiaxed Transition and Crack Propagation Behavior of Laser Welded Al-Li Alloy Reinforced with TiC Nanoparticles

Enhanced mechanical properties of thermo-mechanically affected zone of friction-stir welded AZ61 magnesium alloy joint

The Influence of Heat and Cryogenic Treatment on Microstructure Evolution and Mechanical Properties of Laser-Welded AZ31B

Study on the weld formation, microstructure and mechanical properties of AZ31B Mg alloy in AC/DC mixed gas tungsten arc welding process

Solidification Cracking Restraining Mechanism of Al-Cu-Mg-Zn Alloy Welds Using Cold Metal Transfer Technique

Formation and Strengthening Mechanism of Equiaxial Cellular Grain Zone in AA2195-T8 Al–Cu–Li Alloy Twin-Wire P-VPPA Welded Joint with Ti–Zr Microalloying

Microstructure evolution and corrosion behavior of TIG welded joint of a new Mg Gd Nd Zn Zr alloy during post-weld heat treatment

Microstructural evolution and its effect on mechanical properties in different regions of 2219-C10S aluminum alloy TIG-welded joint

Interfacial Microstructure and Mechanical Properties of AZ31B/AA7075 Joints Using Non-Equilibrium Thermal Compensation Resistance Welding

Microstructure and Impact Mechanical Properties of Multi-Layer and Multi-Pass TIG Welded Joints of Al−Zn−Mg Alloy Plates

Softening Behavior of a New Al-Zn-Mg-Cu Alloy Due to TIG Welding

Study of fatigue crack growth characteristics of TIG welded AZ31B magnesium alloy joint based on laser bionic treatment

Influence of AZ61 Filler Composition on Grain Refinement of Mg-Al-Zn Alloy GTA Welds

Microstructure and Strengthening Mechanism of TIG Welded Joints of a Mg-Nd-Gd Alloy: Effects of Heat Input and Pulse Current

Microstructure and Properties of Mg/Al Joint Welded by Gas Tungsten Arc Welding-Assisted Hybrid Ultrasonic Seam Welding

Microstructure Refinement After the Addition of Titanium Particles in AZ31 Magnesium Alloy Resistance Spot Welds