Abstract:Due to the low content of alloying elements and the lack of effective nucleation sites, the fusion zone (FZ) of tungsten inert gas (TIG) welded AZ31 alloy typically exhibits undesirable coarse columnar grains, which can result in solidification defects and reduced mechanical properties. In this work, a novel welding wire containing MgO particles has been developed to promote columnar-to-equiaxed transition (CET) in the FZ of TIG-welded AZ31 alloy. The results show the achievement of a fully equiaxed grain structure in the FZ, with a significant 71.9% reduction in grain size to 41 mu m from the original coarse columnar dendrites. Furthermore, the combination of using MgO-containing welding wire and pulse current can further refine the grain size to 25.6 mu m. Microstructural analyses reveal the homogeneous distribution of MgO particles in the FZ. The application of pulse current results in an increase in the number density of MgO (1-2 mu m) from 5.16 x 104 m-3 to 6.18 x 104 m-3 . The good crystallographic matching relationship between MgO and alpha-Mg matrix, characterized by the orientation relationship of [112 0 ] alpha-Mg //[01 1 ] MgO and (0 0 02 ) alpha-Mg //( 111) MgO , indicates that the MgO particles can act as effective nucleation sites for alpha Mg to reduce nucleation undercooling. According to the Hunt criteria, the critical temperature gradient for CET is greatly enhanced due to the significantly increased number density of MgO nucleation sites. In addition, the correlation with the thermal simulation results reveals a transition in the solidification conditions within the welding pool from the columnar grain zone to the equiaxed grain zone in the CET map, leading to the realization of CET. The exceptional grain refinement has contributed to a simultaneous improvement in the strength and plasticity of welded joints. This study presents a novel strategy for controlling equiaxed microstructure and optimizing mechanical properties in fusion welding or wire and arc additive manufacturing of Mg alloy components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Microstructure evolution and corrosion behavior of TIG welded joint of a new Mg Gd Nd Zn Zr alloy during post-weld heat treatment

Microstructure and Strengthening Mechanism of TIG Welded Joints of a Mg-Nd-Gd Alloy: Effects of Heat Input and Pulse Current

Research on the Post-Weld Heat Treatment of TIG Repair Welded Joint of Sand-Cast Mg-Y-RE-Zr Alloy

Addressing the Abnormal Grain Coarsening During Post-Weld Heat Treatment of TIG Repair Welded Joint of Sand-Cast Mg-Y-RE-Zr Alloy

Effect of Microstructure on the Corrosion Resistance of TIG Welded 1579 Alloy

Microstructure and Mechanical Properties of Repair Welds of Low-Pressure Sand-Cast Mg–Y–RE–Zr Alloy by Tungsten Inert Gas Welding

Significantly Improved Corrosion Resistance of Mg-15Gd-2Zn-0.39Zr Alloys: Effect of Heat-Treatment

Effect of heat treatment on corrosion behaviors of Mg-6Gd-3Y-0.5Zr alloy

Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt.%) alloy processed by T6 or thermomechanical treatment

Effect of TIG remelting on the microstructure, mechanical properties, and corrosion behavior of 5052 aluminum alloy joints in MIG welding

Microstructural evolution and its effect on mechanical properties in different regions of 2219-C10S aluminum alloy TIG-welded joint

Effect of Heat Treatment on Corrosion Behavior of Mg–5Gd–3Y–0.5Zr Alloy

Influence of Heat Treatment on Corrosion Behavior of Laser Welded Mg-Gd-Y Fusion Zones

Effect of Heat Treatment on Corrosion and Electrochemical Behaviour of Mg–3Nd–0.2Zn–0.4Zr (wt.%) Alloy

Microstructure and Impact Mechanical Properties of Multi-Layer and Multi-Pass TIG Welded Joints of Al−Zn−Mg Alloy Plates

Improved Post-Weld Heat Treatment for Argon TIG Welded Joint of a New Al – Zn – Mg – Cu Alloy

Exceptional Grain Refinement Induced by Dispersed MgO Particles in TIG-welded AZ31 Alloy

Microstructure and mechanical properties of Al/Mg resistance element welded joints

Effect of Heat Treatment on Corrosion and Electrochemical Behaviors of Mg-3Nd-0.2Zn (wt.%) Magnesium Alloy

Microstructure Characteristics, Film Layer Rupture Mechanism and Corrosion Behavior of Hot-Rolled Mg-2Zn-0.2Mn-xNd

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys